Scammell Explorer fixes and workarounds

In reply to Andy and croc, here are a couple of shots of the modification I did to the selector housing after it cracked nearly right off, this method means it is not important to re-weld the alloy casting although it makes a better job if you do. You need to reduce the thickness of the gate bracket on the coupling side to allow the use of the original bolts, and to allow room for the coupling as it is very tight in there. notice R/H gate support reduced in thickness, bolt thr

Hello everyone , sorry for delay in responding have to go to work sometimes !:-D Bernard I did buy some tools a while ago from a chap who had owned several Explorers including one which had suffered a hub/wheel coming adrift in the arena at Great Dorset Steam Fair ! I'm afraid I cannot remember his name ! I have what he told me he used but have not checked the puller yet ! The spanner he sold me was a socket with a 3 foot bar which is not as illustrated in the manual so I would like to borrow yo