KevinT Posted March 29, 2022 Share Posted March 29, 2022 (edited) The suspension units were tedious but can out OK in the end and getting the turret floor attached to the upper turret and getting it to rotate took me quite a while. I could not find any crew to fit inside the turret without a fair bit of modification to them so I will probably come back to that later. There is not a lot of room to get out with the hatch back unless it could lie further back and flatter, either that or the crews must have been slim in stature. I did not go too overboard with the stowage and not sure as to what markings to apply yet. looking forward to the release of the SoD, despite the suspension. Gecko if you are reading this could do with some crew. Anyone know if there are any in the SoD? The 2 figure here are from Bronco and Tamiya. Cheers Kevin Edited March 29, 2022 by KevinT Additional comment 1 Quote Link to comment Share on other sites More sharing options...
.thumb.JPG.fef88ee0409d60bbb480db613c124484.JPG)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.