DanCMP Posted February 1, 2022 Share Posted February 1, 2022 Hello all, I’m looking to make a set of winching scotches/skid pans as carried by Morris Quads/CMPs/Bedford QLBs etc. They're the smaller type compared to those carried by Diamond Ts/Matadors/Scammells etc If anyone has a drawing, annotated photos or can even just provide me with the dimensions I’d appreciate it. Thanks, Dan Quote Link to comment Share on other sites More sharing options...
Niels v Posted February 2, 2022 Share Posted February 2, 2022 I have set of these, they are canadian, would they be relevant ? 1 Quote Link to comment Share on other sites More sharing options...
DanCMP Posted February 5, 2022 Author Share Posted February 5, 2022 On 2/2/2022 at 9:17 PM, Niels v said: I have set of these, they are canadian, would they be relevant ? Hi Neils, Those are exactly what I’m looking for as I’ll be making them for a CMP. If you could supply me with some dimensions; lengths, widths, thickness of metal etc I’d be grateful. Quote Link to comment Share on other sites More sharing options...
Niels v Posted February 5, 2022 Share Posted February 5, 2022 No problem, it will be a week or two before I see them again Quote Link to comment Share on other sites More sharing options...
Niels v Posted February 7, 2022 Share Posted February 7, 2022 Got one home will measure tomorrow 1 Quote Link to comment Share on other sites More sharing options...
Niels v Posted February 9, 2022 Share Posted February 9, 2022 I hope these makes sense 2 Quote Link to comment Share on other sites More sharing options...
Niels v Posted February 9, 2022 Share Posted February 9, 2022 And two more 2 Quote Link to comment Share on other sites More sharing options...
m606paz Posted February 10, 2022 Share Posted February 10, 2022 Thanks for the drawings. I have this, seems to be the late welding version..... Lack the angle betwen both face Quote Link to comment Share on other sites More sharing options...
DanCMP Posted February 10, 2022 Author Share Posted February 10, 2022 Thank you both for going out of your way to provide this info! There’s more than enough information now to make a set. Hopefully I’ll have something made soon. 1 Quote Link to comment Share on other sites More sharing options...
m606paz Posted February 10, 2022 Share Posted February 10, 2022 Anothers pics Quote Link to comment Share on other sites More sharing options...
Niels v Posted February 10, 2022 Share Posted February 10, 2022 The angle is 104 degrees 1 Quote Link to comment Share on other sites More sharing options...
m606paz Posted February 11, 2022 Share Posted February 11, 2022 Hi Niels! Both scotch, early and late, have close measurements Seems to be easy for build, my FGT need a pair. Regards 1 Quote Link to comment Share on other sites More sharing options...
Niels v Posted February 11, 2022 Share Posted February 11, 2022 Hi Yes its not the most complicated shape, but you will need a serious bending machine to handle the metal gauge. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.