andym Posted January 11, 2022 Share Posted January 11, 2022 This may sound daft but for some reason I'm having problems finding a supplier of 5/16" UNF x 5/8" slotted countersunk head BZP machine screws. Can anyone suggest a suitable source? Andy Quote Link to comment Share on other sites More sharing options...
0 radiomike7 Posted January 11, 2022 Share Posted January 11, 2022 1 hour ago, andym said: This may sound daft but for some reason I'm having problems finding a supplier of 5/16" UNF x 5/8" slotted countersunk head BZP machine screws. Can anyone suggest a suitable source? Andy They seem to be in short supply atm, a quick search found some 3/4" ones if you can use them or cut them down to 5/8"? https://www.scparts.co.uk/sc_en/warehouse/assortments-and-fasteners/hardware-screws-bolts-nuts-washers-studs-etc/countersunk-screw/5-16-unf-with-slotted-head.html Quote Link to comment Share on other sites More sharing options...
0 andym Posted January 13, 2022 Author Share Posted January 13, 2022 Thanks Mike, I may have to resort to emailing assorted nut and bolt suppliers! The 3/4 ones would probably do as they aren't in blind holes - they're the screws for the floor plates in my Abbot. Andy Quote Link to comment Share on other sites More sharing options...
0 Surveyor Posted January 13, 2022 Share Posted January 13, 2022 I understand there is a company called either barnsley nut and bolt company they are supposed to have a good range Quote Link to comment Share on other sites More sharing options...
0 7VHU Posted January 13, 2022 Share Posted January 13, 2022 Have you tried Namrick? or a trip to the USA Quote Link to comment Share on other sites More sharing options...
0 ruxy Posted January 13, 2022 Share Posted January 13, 2022 https://www.moss-europe.co.uk/screw-5-16-unf-x-5-8-countersunk-sf605051.html Does not state slotted but probably is , rather than Pozidrive , Phillips etc. Plenty of industrial suppliers will have Unbrako quality in hex. or softer in Torx. But you want slotted. Try other Classic car suppliers , IIRC slotted in this size was a fav. door hinge size. Quote Link to comment Share on other sites More sharing options...
0 ruxy Posted January 13, 2022 Share Posted January 13, 2022 btw - BZP is a rubbish finish - few microns of zinc , sheradized is far superior. Quote Link to comment Share on other sites More sharing options...
0 ruxy Posted January 13, 2022 Share Posted January 13, 2022 By the box or loose £ cheap , this firm of specialist should have aor be able to obtain. https://sunderland-enterprise-park.cylex-uk.co.uk/company/thomas-potter--sunderland--ltd-16620983.html Quote Link to comment Share on other sites More sharing options...
0 andym Posted January 14, 2022 Author Share Posted January 14, 2022 Thanks all - several options there for me to try! Andy Quote Link to comment Share on other sites More sharing options...
Question
andym
This may sound daft but for some reason I'm having problems finding a supplier of 5/16" UNF x 5/8" slotted countersunk head BZP machine screws. Can anyone suggest a suitable source?
Andy
Link to comment
Share on other sites
8 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.