Jump to content

Engine rebuild Royal Enfield 1941 350cc s/v


sealives
 Share

Recommended Posts

Hi

I have just acquired a 1941 350cc s/v engine for my WD/C restoration project. Took the head and cylinder off, and its obvious the big end has too much up/down play. Can anyone suggest an engine rebuild company (ideally in Dorset)?

Thanks in advance.

Link to comment
Share on other sites

  • 3 weeks later...
On 9/10/2021 at 12:11 PM, sealives said:

Hi

I have just acquired a 1941 350cc s/v engine for my WD/C restoration project. Took the head and cylinder off, and its obvious the big end has too much up/down play. Can anyone suggest an engine rebuild company (ideally in Dorset)?

Thanks in advance.

Buy the repro WD manual or the 2 period  service manuals as it’s not too hard to do yourself. Is the engine complete?

Link to comment
Share on other sites

Hi Chris

Thank you for your reply. As it happens and with guidance from Ron I have done exactly as you suggest. The engine is now completely in bits, new parts ordered then off for a rebore and new big end.

 

It was largely complete but missing an oil feed pipe, the valve lifting mechanism and drive sprocket. I have managed to find/buy all the bits.

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...