simon king Posted May 3, 2021 Share Posted May 3, 2021 Has somebody got a photo of a SMTP fitted into its holder on the front of a British made Mk III WS19?. My set came with the holder already fitted midway between the 2 sockets on the left of the face. I have picked up a cheap, non operational SMTP to go in the holder but I just cannot get it to fit between the two sockets, as the winder seems to interfere with the top socket. I’m assuming that the holder is fitted correctly so that 12 o’clock is at 12 o’clock when fitted in the holder. thanks Quote Link to comment Share on other sites More sharing options...
Citroman Posted May 3, 2021 Share Posted May 3, 2021 Is it this you are looking for? Quote Link to comment Share on other sites More sharing options...
simon king Posted May 3, 2021 Author Share Posted May 3, 2021 Thanks, that’s what I expected. Will have to see if there’s any potential to move the sockets within the existing screwholes in the faceplate. Quote Link to comment Share on other sites More sharing options...
Chris Suslowicz Posted July 12, 2023 Share Posted July 12, 2023 That was always a problem with the WS19 Mk.3 - the 12-way power connector reduced the clearance for the watch stem to the point that a lot of them simply wouldn't fit in the holder. Chris. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.