Jump to content

Daf drops injector pump problem


ot-90
 Share

Recommended Posts

Hi all, been having problem with my drops injector pump,  firstly it had a leak from original lift pump (spring return type) which let in air and engine cut out after 15 min or so, changed for the older type unscrew top and pump it up and down one which seems ok, but the vehicle due to covid 19 etc has sat around for a year and done very little.. and now I can't bleed injectors when pumping lift pump as it seems the bosch injector pump housing is pressurising and when priming using lift pump, using finger to block bleed bolt on top left of pump housing pressure is released when I remove finger..This does not seem normal, would the valves inside the injector heads be stuck and causing this or something in the pump that has seized or stuck, have fuel coming in to fuel filter and into pump housing etc but it seems like when lift pumping nothing is going into the top of the injector pump high pressure side.. can only get fuel bleed to injectors when cranking and using wd40 etc..

Link to comment
Share on other sites

A fuel lift/ priming pump only supply's low pressure fuel to the fuel injection pump, to bleed the injectors you will have to loosen the injector pipes one or two at a time and spin the engine using the starter motor. Usually just slacken the injector pipes 1/2 a turn and catch fuel with a rag.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...