Help... anyone know where I can get a flywheel and intermediate plate to take a 12 inch clutch

[Quadman42]

Hi, having stripped the clutch assembly on the Martian at the week end I am now requiring the above. Due to been stood with water been able to run down into the bell housing the twin clutch plates have corroded both onto the flywheel and the intermediate plate. The corrosion is so extensive that it is doubtful that they can be machined back without the loss of clutch grip. Does anyone have any tolerances for machining of flywheels or intermediate plates. The military just used to throw a new complete unit at it

any help gratefully received possible beer vouches for reward

[PITT24423]

In the past we have had tractor flywheels machined and new faces let in when we have used bronze sintered clutches .Several clutch firms around that offered this service , we haven`t done one for a few years now as we have come away from this sort of work.

[Quadman42]

Thanks, I have now found a company at Cleakheaton who will machine the flywheel and intermediate plate, remove the centres from the plates and rebuild with new plates and friction material and renew the springs in the intermediate plate.