Jump to content

NEW FERRET PROJECT - PARTS WANTED (PLEASE) FERRET WHEEL STATION PARTS - ETC - - CHECK THOSE SHEDS ! 00 EC 97


FUGLYONE
 Share

Recommended Posts

I am looking for any Ferret  wheel station parts to help get a ferret back on its wheels. I am looking for any  parts, NOS or parts you have taken off and kept? As long as they are usable I don't  mind work in dismantling, cleaning, blasting etc to get the parts into a usable condition? I also need a coil spring, and an off side engine cover. If I can get these parts together then its a worthwhile project, but the vehicle is borderline parts donor itself. Better if it could be put back together.  I am in Derbyshire , but am happy to travel.

Here is my wish list:

Engine cover ( O/S)

Coil spring

Wishbones (any)

Driveshafts / joints 

Hub parts (Etc)

Brake drums - Brake parts 

Longer term I am after all the  tinny bits that rust, but that's a long way off at the moment. Please let me know what you have and a price .  07866 367059

Thanks

 

Link to comment
Share on other sites

I  have a couple of boxes  of NOS hub gears eg sun wheels ,I think annulus, 2 hub s planet holders bearings .I also have a box of various hub parts covered in grease old stock probably need cleaning.  I have done a few centre bins for my Ferrets and friends Ferrets but they are a pain  and use a lot of sheet steel and take about  2 weeks to do. If you are interested I will send you some pictures

Laurence

Link to comment
Share on other sites

On 9/7/2020 at 10:10 PM, tankdiver said:

I  have a couple of boxes  of NOS hub gears eg sun wheels ,I think annulus, 2 hub s planet holders bearings .I also have a box of various hub parts covered in grease old stock probably need cleaning.  I have done a few centre bins for my Ferrets and friends Ferrets but they are a pain  and use a lot of sheet steel and take about  2 weeks to do. If you are interested I will send you some pictures

Laurence

Yes please ! I  am interested, but have not worked out how to send a PM, please can you give me a call ?  07866 367059

Edited by FUGLYONE
Link to comment
Share on other sites

  • 5 weeks later...
  • 2 months later...

Hi - so far I have been lucky. I  bought the back end of a ferret complete with two wheelstations, and two bevel boxes. Then I was offered a mark 1/2 turret which is correct for the vehicle. The hull is completely stripped and my parts store is slowly building up. I found the brake drums, rear backplates and another 2 parts wheelstations. I have all the propshafts.

After finishing stripping the hull out, I freed off all the hatches, and am needle gunning the hull. Its quick and cheap, and I can do  in sections. Engine is "soaking".  Gearbox not touched yet.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...