Jump to content

Welding C channel on to a range rover


Caddy
 Share

Recommended Posts

So I need to find a way to stick some C channel to the rear of my Range Rover.

The channel holds the rubber seal in place for the boot.

problem is there is not enough gap to pool weld it on and I don’t own a spot welder.

any ideas? Thinking about hiring a spot welder but would probably have to get my own set of electrodes.

 

Ta very muchly

 

Paul

Link to comment
Share on other sites

So, try this stuff (or similar)

https://www.ebay.co.uk/itm/Pliogrip-universal-panel-bond-bonding-metal-wood-plastic-fibreglass-welding-glue/223125314904?hash=item33f34e1d58:g:CG0AAOxy5jxSamr~

Its used on vehicles and has the added benefit of sealing the joint preventing moisture wicking in and rusting out. Not that Range Rover tailgates rust...

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...