john1950 32 Posted December 29, 2019 Share Posted December 29, 2019 (edited) A couple of seat parts pos 432. one part number FV499360. some air filters several available. FV 527304. Open to offers. Seat parts and filters just require postage and a donation to site charity or one of your choice. Edited March 25, 2020 by john1950 addition Quote Link to post Share on other sites
john1950 32 Posted March 16, 2020 Author Share Posted March 16, 2020 I have this compressor to identify, so far I have not found a part number. Then is it any good to anyone. Quote Link to post Share on other sites
john1950 32 Posted March 25, 2020 Author Share Posted March 25, 2020 I have some idea what this is Quote Link to post Share on other sites
Richard Farrant 45 Posted March 25, 2020 Share Posted March 25, 2020 1 hour ago, john1950 said: I have some idea what this is Morris Commercial engine, looks like it is set up to drive a compressor or generator. 1 Quote Link to post Share on other sites
john1950 32 Posted March 25, 2020 Author Share Posted March 25, 2020 (edited) Thanks for the reply. With a manual start push button on the starter. I presume basically the engine that fits in the Morris Quad FAT. Edited March 28, 2020 by john1950 addition Quote Link to post Share on other sites
john1950 32 Posted April 3, 2020 Author Share Posted April 3, 2020 (edited) I am trying to identify these parts. First one is a Tortion bar made by Baumann Feden for Bae Alvis Part Number 096414. 271615500400RF. Date on the envelope with a certificate is 2001, 24 spline, O/A Length 52 and 3/4ins 134cm. DIA 0.559ins 14.2mm, Spline dia 0.996ins 25.30mm. 2nd is an exhaust pipe Nato 2990993015912. part number 503/7/16918/000. Lastly a Tie Rod Parn number 271615320564. Edited February 14 by john1950 Quote Link to post Share on other sites
fv1609 32 Posted April 3, 2020 Share Posted April 3, 2020 The only info I can add is the exhaust pipe also has the part no. A59765 from Beakbane Ltd Kidderminster Quote Link to post Share on other sites
john1950 32 Posted April 3, 2020 Author Share Posted April 3, 2020 (edited) Thats more than I knew, I should have taken it out of the packaging but I did not want to tear it. I did wonder if the tie rods are off a Panther or Husky. I think the tortion bars my be to assist opening a rear deck door. Edited April 4, 2020 by john1950 Quote Link to post Share on other sites
sirhc 27 Posted April 3, 2020 Share Posted April 3, 2020 I would think the exhaust pipe is Challenger 2 (CR2) and possibly part of a desert mod kit (Oman) Quote Link to post Share on other sites
fv1609 32 Posted April 3, 2020 Share Posted April 3, 2020 I don't know, all I can say is that the database I'm working from is approaching 25 years old. So the absence of any parts would suggest something of recent manufacture. Quote Link to post Share on other sites
john1950 32 Posted April 3, 2020 Author Share Posted April 3, 2020 I have a feeling I have a piece of main engine exhaust pipe off a Challenger. Quote Link to post Share on other sites
john1950 32 Posted July 30, 2020 Author Share Posted July 30, 2020 I was looking in the dark box today for a fuel transfer pump and found these as well. Quote Link to post Share on other sites
B series 11 Posted July 30, 2020 Share Posted July 30, 2020 John1950, Those lamps attached to green metal brackets with a rubber strap and hook are for attaching to the end of towed gun barrels when on road movements. They maybe used for other tasks as well. 1 Quote Link to post Share on other sites
john1950 32 Posted August 22, 2020 Author Share Posted August 22, 2020 I have been looking again the first four pics I think are Bedford MJ/MK parts. I have no idea about the rubber seals. Quote Link to post Share on other sites
john1950 32 Posted September 1, 2020 Author Share Posted September 1, 2020 I found a couple of these in another box. Quote Link to post Share on other sites
john1950 32 Posted September 25, 2020 Author Share Posted September 25, 2020 A CAV fuel pump governor Quote Link to post Share on other sites
john1950 32 Posted September 29, 2020 Author Share Posted September 29, 2020 I have a few of these in another box. Quote Link to post Share on other sites
john1950 32 Posted October 26, 2020 Author Share Posted October 26, 2020 I think this one may be off a Bedford Quote Link to post Share on other sites
john1950 32 Posted December 17, 2020 Author Share Posted December 17, 2020 Here is a selection of wireing from one corner. Quote Link to post Share on other sites
john1950 32 Posted December 29, 2020 Author Share Posted December 29, 2020 A few more bits lurking in one corner. Quote Link to post Share on other sites
Richard Farrant 45 Posted December 29, 2020 Share Posted December 29, 2020 Radiator cap for WW2 era Bedford, QL, MW, O type ..... Quote Link to post Share on other sites
john1950 32 Posted December 30, 2020 Author Share Posted December 30, 2020 Thanks for the reply, I think pilot shaft, gearbox bearing, fuel chang over tap, and as you say Radiator cap all for Bedford. They seem much smaller than I remember from working on them. Quote Link to post Share on other sites
john1950 32 Posted January 12 Author Share Posted January 12 An unopened box Quote Link to post Share on other sites
64EK26 13 Posted January 12 Share Posted January 12 On 12/30/2020 at 8:42 AM, john1950 said: Thanks for the reply, I think pilot shaft, gearbox bearing, fuel chang over tap, and as you say Radiator cap all for Bedford. Hi The bearing is from a Bedford Gear Box - equivalent to an SKF 6307 Cheers Richard 1 Quote Link to post Share on other sites
john1950 32 Posted February 9 Author Share Posted February 9 Some more bits Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.