david56 Posted April 26, 2019 Share Posted April 26, 2019 Does anybody Saxon armoured vehicle. That they could measure the wheel stud centres, diameter, width and offset for me please. I want to buy some wheels that came off a Saxon and was hoping they might fit my truck. David. Quote Link to comment Share on other sites More sharing options...
64EK26 Posted April 26, 2019 Share Posted April 26, 2019 Hi They are 10 stud, will try to measure them over the weekend. Measuring offset and width may be a bit more trick, the tyres used are Michelin 365/85R20 XZL Cheers Richard Quote Link to comment Share on other sites More sharing options...
64EK26 Posted April 28, 2019 Share Posted April 28, 2019 Hi PCD of studs is appx 34cm Hole diameter for axle appx 28cm Overall width appx 30cm Offset measures from inside edge appx 27cm By the way they are F******** heavy ! Cheers Rihard Quote Link to comment Share on other sites More sharing options...
radiomike7 Posted April 28, 2019 Share Posted April 28, 2019 5 hours ago, 64EK26 said: Hi PCD of studs is appx 34cm Hole diameter for axle appx 28cm Overall width appx 30cm Offset measures from inside edge appx 27cm By the way they are F******** heavy ! Cheers Rihard IIRC the industry standard is 335mm PCD with a centre bore of 285.75mm/11.25" so you are quite close. If you think those are heavy you should try lifting a Foden DROPS, approx 300kg for the wheel and tyre! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.