Jump to content

cvr(t) clansman to RJB cable


Recommended Posts

Hi Glenn,

A good thing with Clansman is that all cables that look the same are the same. If they have matching plugs on each end then both ends are wired the same so pin 1 goes to pin 1 etc. So all 12 pin cables are interchangeable except for length. The original cables supplied with the vehicle specific installation kit were each numbered in a series that was special to that kit and were labelled at each end with what they plugged into but were often replaced with non-vehicle specific cables that happened to be the right length or a bit longer.

Unfortunately the 'CES: installation kit, electronic equipment, Clansman basic harness' for each vehicle gives a full list of components with NATO stock numbers but not lengths of the cables. Most of these lists are available quite easily (Ebay)

David

Link to post
Share on other sites

The cables to the RJB are 12 pin, but the end where they plug into the RJB is a unique plug not the standard Clansman plug. The last few I’ve done I ended up making the cables. You can sometimes find the ends (try Green Machine Surplus) and solder them to a standard 12 way cable the right length.

Link to post
Share on other sites
  • 9 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...