Willyslancs Posted August 19, 2013 Share Posted August 19, 2013 starting to strip the engine this week all being well .............. Quote Link to comment Share on other sites More sharing options...
Willyslancs Posted August 21, 2013 Share Posted August 21, 2013 If any munga owners are on facebook try DKW MUNGA some good pics on there ............ Quote Link to comment Share on other sites More sharing options...
mungaman Posted August 21, 2013 Share Posted August 21, 2013 if any munga owners are on facebook try dkw munga some good pics on there ............ no joy.......just goes to the wilkapedia page.....any more info ? Quote Link to comment Share on other sites More sharing options...
Willyslancs Posted August 21, 2013 Share Posted August 21, 2013 no joy.......just goes to the wilkapedia page.....any more info ? I just typed DKWMUNGA in the search bar on facebook and it came up as an open group..... Quote Link to comment Share on other sites More sharing options...
Willyslancs Posted August 21, 2013 Share Posted August 21, 2013 stripped all the ancillaries off the engine tonight , then took the head off to peek inside, looking good...........:cool2: Quote Link to comment Share on other sites More sharing options...
Willyslancs Posted August 21, 2013 Share Posted August 21, 2013 A few pictures taken tonight ( recently acquired front undershield in background of one pic) Quote Link to comment Share on other sites More sharing options...
austromunga Posted August 29, 2013 Share Posted August 29, 2013 looking good M8 ... mine is currently having a complete new floor and inner/ outer sills welded in see pic !!!! one question in your pics where do the two pipes (breather??) that lead from the points chamber and up alongside the inlet manifold go?? mine have been cut off!!! every pic I can find around doesn't show where they go!!! Quote Link to comment Share on other sites More sharing options...
Willyslancs Posted August 29, 2013 Share Posted August 29, 2013 Hi mate ,bear with me we are not mechanics .Just asked my dad , he says they just stop behind the engine , ours have a clip on them , the middle one holds the wires for the coils .regards Mark Quote Link to comment Share on other sites More sharing options...
Willyslancs Posted August 29, 2013 Share Posted August 29, 2013 Our set waiting to go back on.............. Quote Link to comment Share on other sites More sharing options...
Willyslancs Posted September 4, 2013 Share Posted September 4, 2013 Mechanic friend has been to my dads today and ok'd the engine(cheers steve). cleaning it has started, new gaskets ready and getting a new bearing for the back of it tomorrow ................ Quote Link to comment Share on other sites More sharing options...
corporal Posted September 7, 2013 Share Posted September 7, 2013 Hi snapper i am basically arfter any pictuers of any mungas be it 4 or 8 as i have one which i am doing up and would just like to have some pics of them so what ever you have would be great thanks very much.Kyle Hi WO11 I own two mungas a 4 and 8 both in running order the 4 has the original engine, the 8 has a conversion with a Taunus V4 engine. If you require any assistance let me know. Corporal Quote Link to comment Share on other sites More sharing options...
Willyslancs Posted September 7, 2013 Share Posted September 7, 2013 welcome along corporal to the Munga section:wave: Quote Link to comment Share on other sites More sharing options...
mogmaner Posted September 7, 2013 Share Posted September 7, 2013 Welcolme corporal , Quote Link to comment Share on other sites More sharing options...
mogmaner Posted September 24, 2013 Share Posted September 24, 2013 Strugling to get the hand brake to hold has any one a exploded drawing or pics ?,so i can work out if its asembled wrongly thanks .Over the weekend road tested the engine swop on trade plates ,pulls clean in all gears giving 47mph in top with current govenor settings. Quote Link to comment Share on other sites More sharing options...
Motmeister23 Posted September 24, 2013 Share Posted September 24, 2013 Hi, if you need spareparts, http://www.matz-autoteile.de/test/installation/images/pdf/mungaliste13.pdf Sorry, only in german. It´s a nice shop with spareparts for Munga/ Iltis and other. Greetings from "an old Iltis-Driver" from Germany Oliver Quote Link to comment Share on other sites More sharing options...
mungaman Posted September 24, 2013 Share Posted September 24, 2013 hi wo11i own two mungas a 4 and 8 both in running order the 4 has the original engine, the 8 has a conversion with a taunus v4 engine. If you require any assistance let me know. Corporal can u post sum pix of the 8 and the v4 ? Where are u located? Quote Link to comment Share on other sites More sharing options...
Willyslancs Posted September 24, 2013 Share Posted September 24, 2013 Strugling to get the hand brake to hold has any one a exploded drawing or pics ?,so i can work out if its asembled wrongly thanks .Over the weekend road tested the engine swop on trade plates ,pulls clean in all gears giving 47mph in top with current govenor settings.[ATTACH=CONFIG]82231[/ATTACH] hi mate bear with me , my dads a silver surfer they are trying to send me a pic of the handbrake exploded ,as we have done ours............ Quote Link to comment Share on other sites More sharing options...
Willyslancs Posted September 24, 2013 Share Posted September 24, 2013 (edited) Ours took loads of soaking in WD40 mate but it did free off ............we had it all in bits and its fairly straight forward..... Edited September 24, 2013 by Willyslancs Quote Link to comment Share on other sites More sharing options...
mogmaner Posted September 24, 2013 Share Posted September 24, 2013 Have just come in from welding floor ,pasenger side finished and primed . Thanks for the pic is there an adjuster on the drum for the brake or is it just the cable ,seems as if the shoes arnt moving? Quote Link to comment Share on other sites More sharing options...
mogmaner Posted September 26, 2013 Share Posted September 26, 2013 Think i have found the problem , The pinch bolt is loose so shoes not expanding. Hope to sort this tonight.Repairs to front floor compleat and primed ,new glass organised through work . May be ready for mot in the next week wether permiting , will post more pics shortly. Quote Link to comment Share on other sites More sharing options...
Oerbi Knoerwens Posted September 29, 2013 Share Posted September 29, 2013 Hi, I am from Germany and I refurbishing a Munga6. He was used by the Royal Airforce in Berlin. If anybody of you has pictures of these in royal airforce blue or know with code number this is,could you please show me? With best regards Oerbi Knoerwens Quote Link to comment Share on other sites More sharing options...
mogmaner Posted September 29, 2013 Share Posted September 29, 2013 Welcome ,I carnt help with the raf munga . Will ask a frend when i see him if he as any info ,He drove british mungas whilst in germany so may have pics. Quote Link to comment Share on other sites More sharing options...
Willyslancs Posted October 5, 2013 Share Posted October 5, 2013 Block been painted , new head gasket sorted ..... going into engine bay soon .. Quote Link to comment Share on other sites More sharing options...
Willyslancs Posted October 6, 2013 Share Posted October 6, 2013 :readpaper: slot part A into piece B!.................(just waiting for clutch plate ) Quote Link to comment Share on other sites More sharing options...
Oerbi Knoerwens Posted October 8, 2013 Share Posted October 8, 2013 Welcome ,I carnt help with the raf munga . Will ask a frend when i see him if he as any info ,He drove british mungas whilst in germany so may have pics. Hi, if someone of you is interested, you can see my work at: http://74295.homepagemodules.de/t3801f50-Umbau-in-den-Originalzustand.html Regards Oerbi Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.