Starfire Posted May 18, 2017 Share Posted May 18, 2017 (edited) Hi All, From the Daimler Ferret User Handbook for the Mk 1 and Mk 2 of 1957, WD Code 12174. I put this together to check off what equipment I had, and what I was missing, but figured that it might be of help to others. The list does not (currently) contain information about the weapon specific and radio equipment that was carried. As it was transcribed by hand, with the assistance of a beer or two, there may be some errors in there. If you find them, let me know and I'll fix it up. [TABLE] [TR] [TD]Item[/TD] [TD]Section[/TD] [TD]Part Number[/TD] [TD]Mk 1 Liaison[/TD] [TD]Mk 2 Recce[/TD] [TD]Stowage Position and Remarks[/TD] [/TR] [TR] [TD]Periscope, No.17, Mk 1[/TD] [TD]V5[/TD] [TD]FV29638[/TD] [TD]3[/TD] [TD]4[/TD] [TD]3 - Hull Front in situ 1 - Spare L.H. of driver[/TD] [/TR] [TR] [TD]Sight, periscopic, AFV, No.3, Mk 1[/TD] [TD]V5[/TD] [TD]FV158021[/TD] [TD]-[/TD] [TD]2[/TD] [TD]1 - Turret roof in situ 1 - Spare L.H. of driver[/TD] [/TR] [TR] [TD]Screen, thin, c/w glass block TL2776[/TD] [TD]LV2[/TD] [TD]FV55121[/TD] [TD]3[/TD] [TD]3[/TD] [TD]2 - Hull in situ 1 - Spare in container under R.H. hatch[/TD] [/TR] [TR] [TD]Block, triplex, 7 in. x 3 1/4 in. x 3/4 in. laminated[/TD] [TD]LV2[/TD] [TD]TL2776[/TD] [TD]3[/TD] [TD]3[/TD] [TD]In screen above[/TD] [/TR] [TR] [TD]Screen, approach march[/TD] [TD][/TD] [TD]FV59291[/TD] [TD]1[/TD] [TD]1[/TD] [TD]As convenient[/TD] [/TR] [TR] [TD]Case, map, G.S., No.4[/TD] [TD]W10[/TD] [TD]VB10009[/TD] [TD]1[/TD] [TD]1[/TD] [TD]On W/T set[/TD] [/TR] [TR] [TD]OR[/TD] [TD][/TD] [TD][/TD] [TD][/TD] [TD][/TD] [TD][/TD] [/TR] [TR] [TD]Board, map, G.S., No.1, Mk 1, with[/TD] [TD]W10[/TD] [TD]VC7827[/TD] [TD]-[/TD] [TD]1[/TD] [TD]On W/T set[/TD] [/TR] [TR] [TD]Panels, matt surface[/TD] [TD]W10[/TD] [TD]VC7709[/TD] [TD]-[/TD] [TD]1[/TD] [TD]On W/T set[/TD] [/TR] [TR] [TD]Box, maps, leather[/TD] [TD][/TD] [TD][/TD] [TD]1[/TD] [TD]-[/TD] [TD]Stowed at Commander's discretion[/TD] [/TR] [TR] [TD]Compound, anti-dim, No.2 in stoneware bottle with flannel[/TD] [TD]LV6/MT1[/TD] [TD]13361[/TD] [TD]1[/TD] [TD]1[/TD] [TD]Front of turret in Mk 2 Recce. Vehicle Under R.H. lower crew seat in my 1 Liaison vehicle[/TD] [/TR] [TR] [TD]Box, first aid outfit for tanks and armoured cars[/TD] [TD]9A[/TD] [TD]421[/TD] [TD]1[/TD] [TD]1[/TD] [TD]In front of W/T set[/TD] [/TR] [TR] [TD]Box, first aid, small[/TD] [TD]9A[/TD] [TD]396[/TD] [TD]1[/TD] [TD]1[/TD] [TD]Wheel guard, R.H. rear[/TD] [/TR] [TR] [TD]Stretcher, ambulance, No.2 sling, Mk 4[/TD] [TD]KC[/TD] [TD]KC5031[/TD] [TD]2[/TD] [TD]-[/TD] [TD]Front L.H. external locker[/TD] [/TR] [TR] [TD]Extinguisher, fire, tetrachloride type, 1 qt[/TD] [TD]LV6/MT1[/TD] [TD]2212[/TD] [TD]1[/TD] [TD]1[/TD] [TD]In bracket[/TD] [/TR] [TR] [TD]Bracket, broad back, fire extinguisher[/TD] [TD]LV6/MT1[/TD] [TD]46655[/TD] [TD]1[/TD] [TD]1[/TD] [TD]Forward of R.H. escape door[/TD] [/TR] [TR] [TD]Extinguisher, fire, bromide, 4 lb type[/TD] [TD]LV6/MT1[/TD] [TD]90269[/TD] [TD]2[/TD] [TD]2[/TD] [TD]In bracket[/TD] [/TR] [TR] [TD]Bracket, fire extinguisher, methyl bromide[/TD] [TD]LV6/MT1[/TD] [TD]90270[/TD] [TD]2[/TD] [TD]2[/TD] [TD]1 - Glacis plate 1 - Hull, L.H. rear[/TD] [/TR] [TR] [TD]Respirators, anti-gas, light:- containers, Mk 2 (spare)[/TD] [TD]A2[/TD] [TD]AB10401[/TD] [TD]3[/TD] [TD]2[/TD] [TD]Front L.H. external locker[/TD] [/TR] [TR] [TD]Respirators, anti-gas, light, not fitted with 5 pouch device - in haversack, light, Mk 1[/TD] [TD]A2[/TD] [TD]AB03080[/TD] [TD]3[/TD] [TD]2[/TD] [TD]Front L.H. external locker[/TD] [/TR] [TR] [TD]Gloves, anti-gas, large[/TD] [TD][/TD] [TD]CJ0031[/TD] [TD]3 pr.[/TD] [TD]2 pr.[/TD] [TD]Wrapped in anti-gas capes[/TD] [/TR] [TR] [TD]Capes, anti-gas, No.1[/TD] [TD][/TD] [TD]CH0010[/TD] [TD]3[/TD] [TD]2[/TD] [TD]Front L.H. external locker[/TD] [/TR] [TR] [TD]Suit, anti-gas, in valise comprising:- Hood - 1 Coat - 1 Trousers - 1 pr. Boots - 1 pr. Gloves - 1pr.[/TD] [TD][/TD] [TD][/TD] [TD]1[/TD] [TD]1[/TD] [TD]Front L.H. external locker[/TD] [/TR] [TR] [TD]Ointment, anti-gas, No.3A, 2 oz set boxes[/TD] [TD]A2[/TD] [TD]AB0136[/TD] [TD]2[/TD] [TD]2[/TD] [TD]Container under R.H. lower seat[/TD] [/TR] [TR] [TD]Bleaching powder, 30%, 2 lb tin[/TD] [TD]A2[/TD] [TD]AB0002[/TD] [TD]1[/TD] [TD]1[/TD] [TD]Front L.H. external locker[/TD] [/TR] [TR] [TD]Rations, 24 hr/man packs[/TD] [TD][/TD] [TD][/TD] [TD]6[/TD] [TD]4[/TD] [TD]3/2 - Inside as convenient 3/2 - Front R.H. external locker[/TD] [/TR] [TR] [TD]Rations, 10 men, compo.[/TD] [TD][/TD] [TD][/TD] [TD]1[/TD] [TD]1[/TD] [TD]Front R.H. external locker[/TD] [/TR] [TR] [TD]jars, vacuum, 1 qt complete[/TD] [TD]J2[/TD] [TD]JB12540[/TD] [TD]3[/TD] [TD]-[/TD] [TD]1 - Front R.H. external locker 2 - Forward of R.H. escape door[/TD] [/TR] [TR] [TD]Jars, thermos, 1 qt complete[/TD] [TD]J2[/TD] [TD]JA7712[/TD] [TD]-[/TD] [TD]2[/TD] [TD]Forward of R.H. escape door[/TD] [/TR] [TR] [TD]Cooker, portable, No.2, Mk 2[/TD] [TD]J2[/TD] [TD]JA9000[/TD] [TD]1[/TD] [TD]1[/TD] [TD]Rear L.H. external locker[/TD] [/TR] [TR] [TD]OR[/TD] [TD][/TD] [TD][/TD] [TD][/TD] [TD][/TD] [TD][/TD] [/TR] [TR] [TD]Cooker, portable, No.2 (new design)[/TD] [TD]J2[/TD] [TD][/TD] [TD]-[/TD] [TD]1[/TD] [TD][/TD] [/TR] [TR] [TD]Bottle, water, aluminium c/w cup[/TD] [TD]A1[/TD] [TD]AA0342[/TD] [TD]3[/TD] [TD]2[/TD] [TD]2 - Forward of L.H. escape door 1 - Rear R.H. side[/TD] [/TR] [TR] [TD]Container, water, 4 1/2 gallons[/TD] [TD]J2[/TD] [TD]JB10700[/TD] [TD]1[/TD] [TD]1[/TD] [TD]Rear L.H. wheelguard[/TD] [/TR] [TR] [TD]Haversack, W.E. pattern 1944, all ranks[/TD] [TD]A1[/TD] [TD]AA2007[/TD] [TD]3[/TD] [TD]2[/TD] [TD]2 - Centre R.H. external locker 1 - Rear R.H. external locker[/TD] [/TR] [TR] [TD]Greatcoats, dismounted, 1940 pattern[/TD] [TD]CE[/TD] [TD]CE0129/48[/TD] [TD]3[/TD] [TD]-[/TD] [TD]Centre R.H. external locker[/TD] [/TR] [TR] [TD]Greatcoats[/TD] [TD]CE[/TD] [TD]CE0112[/TD] [TD]-[/TD] [TD]2[/TD] [TD]Centre R.H. external locker[/TD] [/TR] [TR] [TD]Blanket, barrack, single, 90 x 60 in.[/TD] [TD]KC[/TD] [TD]KC0575[/TD] [TD]9[/TD] [TD]6[/TD] [TD]Centre R.H. external locker[/TD] [/TR] [TR] [TD]Sheets, ground, No.8[/TD] [TD]J1[/TD] [TD]JA1301[/TD] [TD]3[/TD] [TD]2[/TD] [TD]Centre R.H. external locker[/TD] [/TR] [TR] [TD]Shovel, G.S.[/TD] [TD]J1[/TD] [TD]JA1320[/TD] [TD]1[/TD] [TD]1[/TD] [TD]Glacis plate[/TD] [/TR] [TR] [TD]Axe, pick, 4 1/2 lb head[/TD] [TD]J1[/TD] [TD]JA0072[/TD] [TD]1[/TD] [TD]1[/TD] [TD]Glacis plate[/TD] [/TR] [TR] [TD]Axe, pick, 4 1/2 lb helve, plain[/TD] [TD]J1[/TD] [TD]JA0074[/TD] [TD]1[/TD] [TD]1[/TD] [TD]Glacis plate[/TD] [/TR] [TR] [TD]Matchet, 15 in. blade W/O sheath and lanyard[/TD] [TD]KE[/TD] [TD]KE8277[/TD] [TD]1[/TD] [TD]1[/TD] [TD]In sheath[/TD] [/TR] [TR] [TD]Matchet, 15 in. blade sheath[/TD] [TD]KE[/TD] [TD]KE3513[/TD] [TD]1[/TD] [TD]1[/TD] [TD]Centre R.H. external locker[/TD] [/TR] [TR] [TD]Frog cutters, wire folding, Mk 1[/TD] [TD]CN[/TD] [TD]CH/AA0960[/TD] [TD]1[/TD] [TD]1[/TD] [TD]Container under R.H. crew seat or ammunition box[/TD] [/TR] [TR] [TD]Cutters, wire, folding, Mk 1*[/TD] [TD]W1[/TD] [TD]WA6561[/TD] [TD]1[/TD] [TD]1[/TD] [TD]In frog[/TD] [/TR] [TR] [TD]OR[/TD] [TD][/TD] [TD][/TD] [TD][/TD] [TD][/TD] [TD][/TD] [/TR] [TR] [TD]Cutter, wire, folding, Mk 1[/TD] [TD][/TD] [TD][/TD] [TD]1[/TD] [TD]1[/TD] [TD][/TD] [/TR] [TR] [TD]Gloves, wiring[/TD] [TD]W1[/TD] [TD]WA7176[/TD] [TD]1 pr.[/TD] [TD]1 pr.[/TD] [TD]Container under R.H. lower crew seat[/TD] [/TR] [TR] [TD]Jack, lifting, screw, 4 ton triple extension[/TD] [TD]LV6/MT1[/TD] [TD]31443[/TD] [TD]1[/TD] [TD]1[/TD] [TD]Rear L.H. external locker[/TD] [/TR] [TR] [TD]Cover, waterproof, khaki green, 5 ft x 5 ft[/TD] [TD]LV6/MT13[/TD] [TD]27633[/TD] [TD]1[/TD] [TD]-[/TD] [TD]Container rear of spare[/TD] [/TR] [TR] [TD]Cover, waterproof, khaki green, 12 ft x 9 ft 4 in[/TD] [TD]LV6/MT13[/TD] [TD]2496[/TD] [TD]1[/TD] [TD]1[/TD] [TD]Rear L.H. wheelguard[/TD] [/TR] [TR] [TD]Net, garnished, heather, 14 ft x 14 ft[/TD] [TD]E3[/TD] [TD]HE10151[/TD] [TD]1[/TD] [TD]1[/TD] [TD]Rear L.H. wheelguard[/TD] [/TR] [TR] [TD]Rope, towing, medium, 15 ft, Mk 2[/TD] [TD]LV6/MT11[/TD] [TD]17378[/TD] [TD]1[/TD] [TD]1[/TD] [TD]External as convenient[/TD] [/TR] [TR] [TD]Can, lubricating, 1/2 pt with rigid spout (Wesco)[/TD] [TD]LV6/MT1[/TD] [TD]10128[/TD] [TD]1[/TD] [TD]-[/TD] [TD]In holder[/TD] [/TR] [TR] [TD]Can, oil, Wesco, 1/2 pt with flexible spout[/TD] [TD]LV6/MT[/TD] [TD]32797[/TD] [TD]1[/TD] [TD]1[/TD] [TD]In holder[/TD] [/TR] [TR] [TD]Holder, oil can, 1 pt or 1/2 pt[/TD] [TD]LV6/MT1[/TD] [TD]27026[/TD] [TD]1[/TD] [TD]1[/TD] [TD]On oil filler tube in engine compartment[/TD] [/TR] [TR] [TD]Can, oil, cylindrical, 1 qt[/TD] [TD]LV2/TL[/TD] [TD]TL769A[/TD] [TD]1[/TD] [TD]1[/TD] [TD]Rear L.H. external locker or engine compartment[/TD] [/TR] [TR] [TD]Gun, lubricating, Pom Pom, Type A[/TD] [TD]LV6/MT1[/TD] [TD]TT Pom Pom type A[/TD] [TD]1[/TD] [TD]1[/TD] [TD]Rear L.H. external locker[/TD] [/TR] [TR] [TD]Funnel, fuel, filter type[/TD] [TD]LV6/MT15[/TD] [TD]TD9667[/TD] [TD]1[/TD] [TD]1[/TD] [TD]Rear L.H. external locker[/TD] [/TR] [TR] [TD]Injector, oil, large[/TD] [TD]LV6/MT1[/TD] [TD]32622[/TD] [TD]1[/TD] [TD]1[/TD] [TD]Rear L.H. external locker[/TD] [/TR] [TR] [TD]Padlocks[/TD] [TD]G1B[/TD] [TD]GA13911[/TD] [TD]8[/TD] [TD]9[/TD] [TD]Lockers, hatches and covers[/TD] [/TR] [TR] [TD]Key, FV.7, 1-25[/TD] [TD][/TD] [TD][/TD] [TD]3[/TD] [TD]3[/TD] [TD][/TD] [/TR] [TR] [TD]Lock band, FV.7, 1-25[/TD] [TD][/TD] [TD][/TD] [TD]9[/TD] [TD]10[/TD] [TD]Padlocks and driver's switchboard[/TD] [/TR] [TR] [TD]Wheel, road, disk, c/w tyre, 9.00 x 16 R.F. (spare)[/TD] [TD]LV6/MT14[/TD] [TD]90796[/TD] [TD]1[/TD] [TD]1[/TD] [TD]External L.H. side[/TD] [/TR] [TR] [TD]Pump, tyre, foot, car type, c/w hose and connection[/TD] [TD]LV6/MT1[/TD] [TD]12246[/TD] [TD]1[/TD] [TD]1[/TD] [TD]Rear L.H. external locker[/TD] [/TR] [TR] [TD]Tyre pressure gauge, 0-90 lb/sq.in.[/TD] [TD]LV6/MT2[/TD] [TD]4185[/TD] [TD]1[/TD] [TD]1[/TD] [TD]In tool bag[/TD] [/TR] [TR] [TD]Chains, non-skid[/TD] [TD][/TD] [TD][/TD] [TD]1 set[/TD] [TD]1 set[/TD] [TD]Unit transport[/TD] [/TR] [TR] [TD]Handle, starting[/TD] [TD][/TD] [TD]FV58328[/TD] [TD]1[/TD] [TD]1[/TD] [TD]Rear L.H. external locker[/TD] [/TR] [TR] [TD]Sand channels[/TD] [TD][/TD] [TD]FV208302[/TD] [TD]2[/TD] [TD]2[/TD] [TD]Glacis plate[/TD] [/TR] [TR] [TD]Wire, copper, soft, No.20 S.W.G.[/TD] [TD]G2A[/TD] [TD]GB11185[/TD] [TD]1/2 lb[/TD] [TD]1/2 lb[/TD] [TD]Rear L.H. external locker[/TD] [/TR] [TR] [TD]Mirror, driving[/TD] [TD]LV6/MT3[/TD] [TD]44106[/TD] [TD]2[/TD] [TD]2[/TD] [TD]1 - Front R.H. wheelguard 1 - Front L.H. wheelguard[/TD] [/TR] [TR] [TD]Holder, vehicle literature, 10 1/2 in. x 1 1/2 in., Mk 2[/TD] [TD]LV6/MT1[/TD] [TD]9893[/TD] [TD]1[/TD] [TD]1[/TD] [TD]Underneath R.H. hatch[/TD] [/TR] [TR] [TD]Instruction book[/TD] [TD][/TD] [TD][/TD] [TD]1[/TD] [TD]1[/TD] [TD]In literature holder[/TD] [/TR] [TR] [TD]Army book 413[/TD] [TD][/TD] [TD][/TD] [TD]1[/TD] [TD]1[/TD] [TD]In literature holder[/TD] [/TR] [TR] [TD]Servicing schedule, W.O. Code No.10836[/TD] [TD][/TD] [TD][/TD] [TD]1[/TD] [TD]1[/TD] [TD]In literature holder[/TD] [/TR] [TR] [TD]Stowage diagrams[/TD] [TD][/TD] [TD][/TD] [TD]1 set[/TD] [TD]1 set[/TD] [TD]In literature holder[/TD] [/TR] [TR] [TD]Table of tools and equipment, No.36[/TD] [TD][/TD] [TD][/TD] [TD]1[/TD] [TD]1[/TD] [TD]In literature holder[/TD] [/TR] [TR] [TD]Table of tools and equipment, No.205[/TD] [TD][/TD] [TD][/TD] [TD]-[/TD] [TD]1[/TD] [TD]In literature holder[/TD] [/TR] [TR] [TD]Bag, tool, empty, No.1[/TD] [TD]F1[/TD] [TD]FA20000[/TD] [TD]1[/TD] [TD]1[/TD] [TD]Rear L.H. external locker[/TD] [/TR] [TR] [TD]Box, tin, for 3 electric lamp bulbs[/TD] [TD]LV6/MT3[/TD] [TD]ZA39302[/TD] [TD]1[/TD] [TD]1[/TD] [TD]L.H. side of driver[/TD] [/TR] [TR] [TD]Tape, insulating 1/2 in. wide - 2 oz roll[/TD] [TD]LV6/MT1[/TD] [TD]2250[/TD] [TD]1[/TD] [TD]1[/TD] [TD]In tool bag[/TD] [/TR] [TR] [TD]Plug, sparking, No.1, Mk 1, 14 mm (spare)[/TD] [TD]LV6/MT4[/TD] [TD]3343[/TD] [TD]2[/TD] [TD]2[/TD] [TD]Engine compartment[/TD] [/TR] [TR] [TD]Vessel, boiling, electric, 3 pt, 750 watt[/TD] [TD]LV6/MT3[/TD] [TD]28260[/TD] [TD]1[/TD] [TD]-[/TD] [TD]Rear L.H. external locker[/TD] [/TR] [TR] [TD]OR[/TD] [TD][/TD] [TD][/TD] [TD][/TD] [TD][/TD] [TD][/TD] [/TR] [TR] [TD]Vessel, boiling, No.2, Mk 1[/TD] [TD]LV6/MT3[/TD] [TD]FV159910[/TD] [TD]1[/TD] [TD]-[/TD] [TD][/TD] [/TR] [TR] [TD]Hammer, engineers, ball pane, 1 lb 8 oz[/TD] [TD]F1[/TD] [TD]FA14127[/TD] [TD]1[/TD] [TD]1[/TD] [TD]In tool bag[/TD] [/TR] [TR] [TD]Screwdriver, 5 in. length of blade[/TD] [TD]F1[/TD] [TD]FA16786[/TD] [TD]1[/TD] [TD]1[/TD] [TD]In tool bag[/TD] [/TR] [TR] [TD]Spanner, adjustable, 11 in.[/TD] [TD]F1[/TD] [TD]FA17005[/TD] [TD]1[/TD] [TD]1[/TD] [TD]In tool bag[/TD] [/TR] [TR] [TD]Pliers, side, cutting, 6 in.[/TD] [TD]F1[/TD] [TD]FA15876[/TD] [TD]1[/TD] [TD]1[/TD] [TD]In tool bag[/TD] [/TR] [TR] [TD]Spanner, American thread, box tubular, D.E., 5/8 in. x 3/4 in.[/TD] [TD]F1[/TD] [TD]FA17055[/TD] [TD]1[/TD] [TD]1[/TD] [TD]In tool bag[/TD] [/TR] [TR] [TD]Spanner, American thread, box tubular, D.E., 7/8 in. x 15/16 in.[/TD] [TD]F1[/TD] [TD]FA17057[/TD] [TD]1[/TD] [TD]1[/TD] [TD]In tool bag[/TD] [/TR] [TR] [TD]Spanner, American thread, box tubular, D.E., 1 1/8 in. x 1 1/4 in.[/TD] [TD]F1[/TD] [TD]FA17659[/TD] [TD]1[/TD] [TD]1[/TD] [TD]In tool bag[/TD] [/TR] [TR] [TD]Spanner, bar, tommy, No.3[/TD] [TD]F1[/TD] [TD]FA17598[/TD] [TD]1[/TD] [TD]1[/TD] [TD]In tool bag[/TD] [/TR] [TR] [TD]Spanner, bar, tommy, No.4[/TD] [TD]F1[/TD] [TD]FA17599[/TD] [TD]1[/TD] [TD]1[/TD] [TD]In tool bag[/TD] [/TR] [TR] [TD]Spanner, bar, tommy, No.5[/TD] [TD]F1[/TD] [TD]FA17600[/TD] [TD]1[/TD] [TD]1[/TD] [TD]In tool bag[/TD] [/TR] [TR] [TD]Spanner, bar, tommy, No.6[/TD] [TD]F1[/TD] [TD]FA17601[/TD] [TD]1[/TD] [TD]1[/TD] [TD]In tool bag[/TD] [/TR] [TR] [TD]Spanner, American thread, box tubular, D.E., 3/8 in. x 7/16 in.[/TD] [TD]F1[/TD] [TD]FA17052[/TD] [TD]1[/TD] [TD]1[/TD] [TD]In tool bag[/TD] [/TR] [TR] [TD]Spanner, American thread, box tubular, D.E., 1/2 in. x 9/16 in.[/TD] [TD]F1[/TD] [TD]FA17053[/TD] [TD]1[/TD] [TD]1[/TD] [TD]In tool bag[/TD] [/TR] [TR] [TD]Spanner, American thread, Open jaw, D.E., 7/16 in. x 1/2 in. across flats[/TD] [TD]F1[/TD] [TD]FA17096[/TD] [TD]1[/TD] [TD]1[/TD] [TD]In tool bag[/TD] [/TR] [TR] [TD]Spanner, American thread, Open jaw, D.E., 9/16 in. x 5/8 in. across flats[/TD] [TD]F1[/TD] [TD]FA17097[/TD] [TD]1[/TD] [TD]1[/TD] [TD]In tool bag[/TD] [/TR] [TR] [TD]Spanner, American thread, Open jaw, D.E., 19/32 in. x 11/16 in. across flats[/TD] [TD]F1[/TD] [TD]FA17098[/TD] [TD]1[/TD] [TD]1[/TD] [TD]In tool bag[/TD] [/TR] [TR] [TD]Spanner, American thread, Open jaw, D.E., 3/4 in. x 7/8 in. across flats[/TD] [TD]F1[/TD] [TD]FA17099[/TD] [TD]1[/TD] [TD]1[/TD] [TD]In tool bag[/TD] [/TR] [TR] [TD]Spanner, American thread, Open jaw, D.E., 15/16 in. x 1 in. across flats[/TD] [TD]F1[/TD] [TD]FA17101[/TD] [TD]1[/TD] [TD]1[/TD] [TD]In tool bag[/TD] [/TR] [TR] [TD]Spanner, socket handles, ratchet, 1/2 in. sq drive[/TD] [TD]F1[/TD] [TD]FA17410[/TD] [TD]1[/TD] [TD]1[/TD] [TD]In tool bag[/TD] [/TR] [TR] [TD]Spanner, socket, B.S.W., 7/16 in. extra deep for 14 mm sparking plug[/TD] [TD]F1[/TD] [TD]FA17500[/TD] [TD]1[/TD] [TD]1[/TD] [TD]In tool bag[/TD] [/TR] [TR] [TD]Spanner, B.S.W., open jaw, D.E., 3/8 in. x 7/16 in.[/TD] [TD]F1[/TD] [TD]FA17235[/TD] [TD]1[/TD] [TD]1[/TD] [TD]In tool bag[/TD] [/TR] [TR] [TD]Spanner, B.S.W., open jaw, D.E., 1/4 in. x 5/16 in.[/TD] [TD]F1[/TD] [TD]FA27234[/TD] [TD]1[/TD] [TD]1[/TD] [TD]In tool bag[/TD] [/TR] [TR] [TD]Spanner, B.S.W., open jaw, D.E., 1/2 in. x 9/16 in.[/TD] [TD]F1[/TD] [TD]FA17236[/TD] [TD]1[/TD] [TD]1[/TD] [TD]In tool bag[/TD] [/TR] [TR] [TD]Spanner, B.S.W., open jaw, D.E., 5/8 in. x 3/4 in.[/TD] [TD]F1[/TD] [TD]FA17237[/TD] [TD]1[/TD] [TD]1[/TD] [TD]In tool bag[/TD] [/TR] [TR] [TD]Spanner, B.S.W., open jaw, D.E., 11/16 in. x 13/16 in.[/TD] [TD]F1[/TD] [TD]FA17238[/TD] [TD]1[/TD] [TD]1[/TD] [TD]In tool bag[/TD] [/TR] [TR] [TD]Spanner, B.S.W., open jaw, D.E., 1/8 in. x 3/16 in.[/TD] [TD]F1[/TD] [TD]FA17233[/TD] [TD]1[/TD] [TD]1[/TD] [TD]In tool bag[/TD] [/TR] [TR] [TD]Spanner, B.S.W., box tubular, 7/16 in. x 7/16 in.[/TD] [TD]F1[/TD] [TD]FA17220[/TD] [TD]1[/TD] [TD]1[/TD] [TD]In tool bag[/TD] [/TR] [TR] [TD]Spanner, B.A, size 0-2[/TD] [TD]F1[/TD] [TD]FA17178[/TD] [TD]1[/TD] [TD]1[/TD] [TD]In tool bag[/TD] [/TR] [TR] [TD]Spanner, B.A, size 1-3[/TD] [TD]F1[/TD] [TD]FA17179[/TD] [TD]1[/TD] [TD]1[/TD] [TD]In tool bag[/TD] [/TR] [TR] [TD]Spanner, B.A, size 4-6[/TD] [TD]F1[/TD] [TD]FA17180[/TD] [TD]1[/TD] [TD]1[/TD] [TD]In tool bag[/TD] [/TR] [TR] [TD]Spanner, B.A, size 5-7[/TD] [TD]F1[/TD] [TD]FA17181[/TD] [TD]1[/TD] [TD]1[/TD] [TD]In tool bag[/TD] [/TR] [TR] [TD]Key, square, male, 5/16 in. x 4 in. long - for fluid coupling filler[/TD] [TD][/TD] [TD]FV55456[/TD] [TD]1[/TD] [TD]1[/TD] [TD]In tool bag[/TD] [/TR] [TR] [TD]Key, square, male, 11/16 in. x 7 1/2 in. long - for gearbox and transfer box filler and drain[/TD] [TD][/TD] [TD]FV51302[/TD] [TD]1[/TD] [TD]1[/TD] [TD]In tool bag[/TD] [/TR] [TR] [TD]Key, hexagon, male, 1/2 in. x 9 in, long - for fuel and engine oil drain[/TD] [TD][/TD] [TD]FV51307[/TD] [TD]1[/TD] [TD]1[/TD] [TD]In tool bag[/TD] [/TR] [TR] [TD]Key, square, female, 3/8 in. - for budget locks or engine covers[/TD] [TD][/TD] [TD]FV51304[/TD] [TD]1[/TD] [TD]1[/TD] [TD]In tool bag[/TD] [/TR] [TR] [TD]Key, hexagon, male, 1 in. B.S.P.[/TD] [TD][/TD] [TD]FV51303[/TD] [TD]1[/TD] [TD]1[/TD] [TD]In tool bag[/TD] [/TR] [TR] [TD]Wheel brace assembly[/TD] [TD][/TD] [TD]FV58330[/TD] [TD]1[/TD] [TD]1[/TD] [TD]In tool bag[/TD] [/TR] [TR] [TD]Bucket, water, canvas Mk 5[/TD] [TD]51[/TD] [TD]JA0243[/TD] [TD]1[/TD] [TD]1[/TD] [TD]Rear L.H. external locker[/TD] [/TR] [TR] [TD]Brushes, hand, bass, Mk 1[/TD] [TD]KE[/TD] [TD]KE0874[/TD] [TD]1[/TD] [TD]1[/TD] [TD]Rear L.H. external locker[/TD] [/TR] [TR] [TD]Brushes, cleaning, 11 in.[/TD] [TD]LV6/MT1[/TD] [TD]3569[/TD] [TD]1[/TD] [TD]1[/TD] [TD]Rear L.H. external locker[/TD] [/TR] [TR] [TD]Brushes, 12 in.[/TD] [TD]LV6/MT1[/TD] [TD]3572[/TD] [TD]1[/TD] [TD]1[/TD] [TD]Rear L.H. external locker[/TD] [/TR] [/TABLE] Let me know if you have any queries. Cheers, Terry Edited May 18, 2017 by Starfire Added reference date. Quote Link to comment Share on other sites More sharing options...
ferretfixer Posted May 18, 2017 Share Posted May 18, 2017 (edited) NOTE: Anti-Dim Bottle normally stowed in small square box. Bolted/ spot welded on the side of the 88 Set Stowage box. To the left of the drivers shoulder (Looking forward from inside) In MK.II Series of Ferrets. Mike. :thumbsup: Edited May 18, 2017 by ferretfixer Quote Link to comment Share on other sites More sharing options...
Starfire Posted May 18, 2017 Author Share Posted May 18, 2017 The early version of the 88 set box didn't have the small compartment on the side of it Construction wise, it's spot welded on. Cheers, Terry Quote Link to comment Share on other sites More sharing options...
Starfire Posted May 18, 2017 Author Share Posted May 18, 2017 Sorry, I forgot to include the fact that this list is from the Daimler Ferret User Handbook for the Mk 1 and Mk 2 of 1957, WD Code 12174. Depending on when in its service life you are kitting your Ferret out for, it may well be out of date and I would love to get my hands on a copy of a later list, for comparison. Cheers, Terry Quote Link to comment Share on other sites More sharing options...
ferretfixer Posted May 18, 2017 Share Posted May 18, 2017 The early version of the 88 set box didn't have the small compartment on the side of it Construction wise, it's spot welded on. Cheers, Terry Agreed, But I have also seen these in Service. Bolted on the side of the 88 Set box. Perhaps this was a later mod to bring some of these stowage boxes up to standardisation. Alongside the later already fitted anti-dim holders? Quote Link to comment Share on other sites More sharing options...
fv1609 Posted May 18, 2017 Share Posted May 18, 2017 I expect that took a while to do Terry. Out curiosity I compared it with the list in the Fieldmouse Provisional UHB WO Code No.17766 1953. Things are much the same although some items had not yet been codified with a FV number or a VAOS Section. Rummaging in the tool bag there used to be Can, filling, flexible spout (Wesc Patt.) LV6/MT1 Pt. No. 32797 I can't find that in the later tool bag but see that it moved to its own holder. In the original Spanner American FA17057 it gives DE as 1 1/8" which is later corrected to 7/8". Also in the original tool bag there were no BA spanners. Only spotted one typo Terry, Wire, copper, soft, Nk. 20 SWG. You want a later UHB I have Army Code No.12174 1969 & CES Army Code No.33044 1973. There was no stowage diagram in the Fieldmouse UHB but I have the Stowage Sketches also designated WO Code No.10766 1954 Quote Link to comment Share on other sites More sharing options...
Starfire Posted May 18, 2017 Author Share Posted May 18, 2017 Thanks Clive, I've corrected the typo. If you can get me copies of those documents, that'd be great. Cheers, Terry Quote Link to comment Share on other sites More sharing options...
fv1609 Posted May 18, 2017 Share Posted May 18, 2017 Terry first problem is finding the documents, been here a year & not unpacked books fully yet, let alone get them in a findable order. When I do find them I can scan the relevant pages, but complete documents aren't feasible I'm afraid not just the time to do it but I have no broadband I'm just using a mobile phone link that is bandwidth limited, although I have bought more it just seems to get used up just as fast! Quote Link to comment Share on other sites More sharing options...
Starfire Posted May 18, 2017 Author Share Posted May 18, 2017 Hi Clive, I knew you had connectivity problems, but by the way that you were talking about them, I thought you had those documents in soft copy. No stress. Cheers, Terry Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.