76mm Scorpion Breech

[Andrew Rowe]

Would someone out there know what the part number is, or where to find a couple of internal torque springs that sit inside the actuating shaft in the breech ring of a 76mm. The spring would be something like 7/8" in dia. and maybe 4" to 6" long. Any ideas? Cheers Andrew.

[Old_ROF]

Hi,

Not sure if you managed to sort out your problem.  Hoever I've spoken to an old colleague and found that Repaircraft of Cranleigh Surry look after the Scorpion for Spain and Thailand.

Contact details for them can be found on.

www.repaircraft.com/html/ContactPage.html

Good luck.

Old ROF

[Andrew Rowe]

Yes, they are a series of very thin flat spring steel in a stack of about 17 that fit in the squared hole, Thanks Andrew.