Truck257 Posted June 25, 2019 Author Posted June 25, 2019 10 hours ago, Zero-Five-Two said: You don't like hanging around!! Very fast work. Is that 2 pack? Looks very shiney What's the Dawson motor behind yours? looks interesting Got to crack on whilst the buzz is there, yeah 2 pack the chassis and all the green will be synthetic as it’s nice and thick and covers well. Well spotted its a 1915 Leyland, served in WW1 in the Egyptian desert apparently according to Google haha Quote
Truck257 Posted June 25, 2019 Author Posted June 25, 2019 8 hours ago, Zuffen said: Even the ladder is colour coordinated! Haha everything is Yellow I even bought a 1980 Land Rover Series 3 and within 5 weeks of purchase I did an engine swap for a 3L Essex V6 and sprayed it all family yellow 1 Quote
Truck257 Posted June 25, 2019 Author Posted June 25, 2019 6 hours ago, radiomike7 said: Did I spot Revolution wheels on the A35? Indeed 1 Quote
radiomike7 Posted June 25, 2019 Posted June 25, 2019 4 hours ago, Truck257 said: Got to crack on whilst the buzz is there, yeah 2 pack the chassis and all the green will be synthetic as it’s nice and thick and covers well. Well spotted its a 1915 Leyland, served in WW1 in the Egyptian desert apparently according to Google haha Have you seen the photo on the 1978 LB run or were you the owner at the time? https://ccmv.aecsouthall.co.uk/p971350189/h507b4532#h507b4532 Quote
Truck257 Posted June 25, 2019 Author Posted June 25, 2019 1 minute ago, radiomike7 said: Have you seen the photo on the 1978 LB run or were you the owner at the time? https://ccmv.aecsouthall.co.uk/p971350189/h507b4532#h507b4532 Yes I’ve seen that one I’ve done loads of research into her. Unfortunately not the owner she’s just in for a check over and a few bits to fix, also on that L2B photo page you’ll see a 1913 FWD lorry, we’ve worked on that one too same owner as the Leyland Quote
Truck257 Posted July 8, 2019 Author Posted July 8, 2019 Finally decided to crack on with my most feared job. The wiring.......... now to most of you it might be easy but because I am part of the youth generation it’s never been my strong point I could just about wire a plug in. So with no help and a wiring loom and a multi meter I set about re building the dash pod which turns out all the wires inside the dash had been disconnected so a full strip down clean up re wire and rebuild. And the dash switch board rebuild which was a case of strip read all the little wire names work out what the hell dose what use a boost pack to put feeds here there and everywhere and see where they come out haha. Now both rebuilt and in the vehicle working as they should I think. All to do now it to sort out what feeds and wires come out of the floor and tidy it all up. Scary moments I don’t like electrics haha P.S I do have the hand book with the wiring diagram in the back. That was a god send. 2 Quote
Zero-Five-Two Posted July 9, 2019 Posted July 9, 2019 Militant electrics are very simple compared to modern motors, but do shout up if you need advice. Quote
radiomike7 Posted July 9, 2019 Posted July 9, 2019 2 hours ago, Zero-Five-Two said: Militant electrics are very simple compared to modern motors, but do shout up if you need advice. Out of interest Rob, is the tanker insulated return or conventional? Quote
Zero-Five-Two Posted July 9, 2019 Posted July 9, 2019 30 minutes ago, radiomike7 said: Out of interest Rob, is the tanker insulated return or conventional? You would have thought it would be, being fuel related, but no, all standard chassis earth. However, handbook states electric to be isolated when loading or discharging fuel. Quote
Truck257 Posted July 9, 2019 Author Posted July 9, 2019 5 hours ago, Zero-Five-Two said: Militant electrics are very simple compared to modern motors, but do shout up if you need advice. I’m okay with modern stuff as long as it’s wiring and not electric diagnosing. Plus I have fancy computers but just getting used to all the wire names and things like that but thanks rob I’m getting there slowly enjoying it haha Quote
Truck257 Posted July 15, 2019 Author Posted July 15, 2019 Another chapter in the horrible tale of.... Militant electrics and the boy who knew nothing. Haha this part was pretty easy just take them off take them apart read the wiring names inside label the wires so I know where they need to go clean up put together and paint. Simple easy and effective. Think I’m getting somewhere now. I think I’m going to start stripping the inside of the cab and start painting it next before re fitting all the electrical items 1 Quote
Truck257 Posted September 10, 2019 Author Posted September 10, 2019 Well after stripping all the electrics out and taking them apart for a clean and investigation. Everything painted and ready to refit and hope they all work too. Finally got round to painting more of the inside of the cab. So far on the inside the top half of the cab is all painted and all the driver side, so ready for refitting of parts ie dash, all the electrics, seat and rear shelves. Hopefully really start cracking on with the final parts to get all the cab and electrics complete the finish painting the last of the panels so I can mask her up and spray everything else DBG. Hoping to get her back on the road for the end of this year. All complete painted all lights complete and ready to accept a body and crane one I can build a body and find a crane to put on her. Hopefully more regular updates from now till then Quote
Zero-Five-Two Posted September 10, 2019 Posted September 10, 2019 Looking good, surprising how much a clean up and fresh coat of paint can transform something Quote
Truck257 Posted September 10, 2019 Author Posted September 10, 2019 Tonight was the night I’ve been dreading. Worse than taking the looms and wiring out, worse than taking them all apart and cleaning them and making sure there all serviceable. Was the fitting............surely they won’t work I’m useless haha. Wrong all fitted and after 3 months of standing she fired up with no fuel bleeding on the second turn. It was beautiful. A noise my ears had much missed. Once I composed myself I set about checking the charge rate and switching all the lights and make sure the feeds come out of all the appropriate wires for when the lights are connected and they all work. I’m astounded. And very happy. Can’t wait to get all the drivers side all built back up and ready 2 Quote
Zero-Five-Two Posted September 10, 2019 Posted September 10, 2019 Gotta have a bit of faith in your own abilities. Not sure about the double stack of batteries, though, you might have trouble clamping them down Quote
Truck257 Posted September 10, 2019 Author Posted September 10, 2019 Haha the batteries are temporary. I didn’t have the strength to haul 2 big un’s in there this time of night so picked 2 smaller out of the scrap. I do have faith that it should work but just very daunting the whole sparkies thing. Definitely chuffed it worked just finished painting a few more bits for the cab Quote
Truck257 Posted September 15, 2019 Author Posted September 15, 2019 Making a last break in the good ish weather finally she’s allllllll yellow. It’s come out okay few runs but a nice coverage. She’s really starting to take shape. Smiles all round. 1 Quote
Zero-Five-Two Posted September 15, 2019 Posted September 15, 2019 (edited) Gotta wear shades for that one. Looks magnificent, mate. Black bumper to follow? Will set it off nicely. Definitely one for next years calendar Edited September 15, 2019 by Zero-Five-Two Spelling Quote
Truck257 Posted September 16, 2019 Author Posted September 16, 2019 Thanks mate she’ll look less like a yellow box once all the hardwares bolted on. The bumpers going black on the inside and black and yellow chevrons on the outside to match the yellow and black chevrons on the rear light boards that I’m going to make Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.