Jump to content

FWD arrives


bobs1918
 Share

Recommended Posts

I do like the look of the workshop equipment, no doubt you can explain the functions of the universal equipment, it appears to be driven via a 'grad-start' electrical drive?

A flat bed Drummond lathe I unfortunately sold had a grad start which I think may have been used in a workshop truck?

Link to comment
Share on other sites

  • 2 weeks later...

Ran across an old print in my files of a machine shop truck so I am posting it here in case it might be of use. The image is from 1918 and that's about all the context there is on it. I found it as I looking for some sort of an instruction manual for the machine shop I may once have had. It's on one 20 year old inventory of stuff but I don't find it now. I'll keep looking.

 

MS-18.jpg

 

PS- Accidentally loaded the ammo body pic but decided to leave it for grins.

WWI, Ammo Body.jpg

Link to comment
Share on other sites

Not sure what this geared unit is for. Maybe a PTO for one of the machines?

 

I would go with "speedometer" too. There might even be a skew-drive out the side for the cable?

 

Speedo drives were much chunkier back then, even on motorcycles:

http://s947.photobucket.com/user/1953Indian/media/Ner%20A%20Car%20with%20speedometer%20A.jpg.html

Link to comment
Share on other sites

  • 4 months later...

Found a great fabricator in California, home of speed and custom shops. He was able to fabricate the missing engine panels.I still need to make a frame of 5mm round steel rod. The panel is then rolled around it and it gives the panel rigidityIMG_2034.jpgStill in the shipping box. It took a long time to find someone to make these for a reasonable price.

IMG_2032.jpg

IMG_2033.jpg

Link to comment
Share on other sites

  • 2 months later...

We started work on the patterns and core boxes for the valve covers for the Wisconsin in Bob's

FWD. Interestingly the original piece we are using as a "go-by" arrived here in far northern Maine

from great Britain via Connecticut. I suspect at least one of you might have been involved with that

transaction. Having the actual part on hand has saved us quite a bit of work and... with it sitting on my desk at

school (soon to be shipped back from where it came) no small amount of wonder among the students. "A 1917 FWD?? What's that?"

 

Anyway, we (my students and I) started by developing a 3D model using Autodesk Inventor Professional. (I teach

Drafting & Engineering Technology to High School students). Once the model was completed we generated a set of 2D

working drawings. Usually I would disappear into my shop and turn this piece out using my old 1943 Southbend lathe. However.... this time I decided to use the Tormach PCNC 440 CNC mill we have newly installed in our classroom lab space.

 

Using Fusion 360 we generated the setups and the tool paths then post processed it to PathPilot. I cannot say it is faster than using the old Southbend but it sure is nice.

 

Here is a photo of the patterns ready to be mounted on the backerboard. The core boxes should be cut this week.

 

Jbiz3lqET9Vn8vnC7MzfiTtrrL5EgtHedAIo1BKp5x4Bx-O3AExhN0lqGJQ40MOwUIzAo5WPnxvntv7zqQ_9RpyNuTVmvww_9rQTTfxoR4qnvEY5mwpzMxuH_dK21JUwYhFo1fbfo4cEZY500lTIUW7VHXPfXvYDeQoeNlZxcubhDMKR7223KjzmS701y7-6-KR6Yf3-V2SEka3N59BJNId2xcEB--fnLZ1OB9aERQ8-bklDd3C5vQHl12JRz_r7tB933ujcO_bhKKMzXrbn5X8EbngChn-tholZibAlt69qQzvuf1LDJGTWeHw_43JsnA0v-1q_Vptye_TZpXB3auVzD2t0ZtGHXF5JjR13uklPPIPceZBOF5IB7Q3Ak8FDzTDbU8C1ssgx1bz9SPcAxm40_nW-M6HrJSwqzsLY0Nq5o_XpbYl80ZkpxsPxeOoi9CmZWFQOm2Pu4knKhUc_5RRBuL-OhDq9H8lglmIYAj1KdecS4WgtI9gdxgLV0oTe9fVoNClKJQyXMjStI3P1ngReT7Jg4SdLPz9eKfjub4AWIFvWQ-32r7j0Qf0zT3TeZ8Hg8jtwgGhqR0v6N3l9ts5CgQaWEC0N9SG0_rAFiN9SUDtRZrDmqFQmgamQjJWg2Rv78WFW5g=w267-h356-no

 

Best regards,

 

Terry

Link to comment
Share on other sites

Today we finished milling out the core boxes for the valve covers for Bob's FWD.

Again we used the Tormach 440 (Love this machine!)

 

Now we just need to mount the patterns on a backer board, seal and finish them.

The core boxes will be joined together and mounted in a frame and will be sealed

and finished as well - then its off to the foundry!

wmvbbXHJNDRzZXjg9uAeLpLgHRbkGm1fH1IowLbp8A0nQ9u4-4axpruX97IN7F-zSjtnGqFviOsGNGKLb25dL6o0Po05_R0l8S--pd-ypHUZluhl8N50KsgY720tBRfTyHBQ5YrbqmpxRvUm5p-2U-Oa1t0X7ItvoJtreGB_IBzfZgyAk0p6fKlGcOVCZTDhZLqYYJ8tsMhRB9jcXKpiJLhrd8sBsuwEejxzqT7a4v5kN-jHPn-DF_RcILhnr4xN5zGjHHM728vYndIy47Whq2FA69wh5QSZvAQeMEIs2TDJYGytEMy504IrWbTfGPFLQkZJ5KnTO4nD7_LmtSsimbb60LnLxQtWo-4VwgPbMBu7pxCoF4MzYdcaO-Z1E3DlgE01BQE_TP1sYsYl-nZwAlmd6qGDJLyrf89ZAchZzrISNjSfDFY1rCOfaMJMXZMCyvLOgvuq7fp1lUWi9HIewzLFym-KgXDp3064NH_KQPew_dXli9giCI0mfmCKo-yZu6VwTy15grzspfWOo-2t7yFyXm1LGmDI2HvFn4ttlvP_69eHUSXpbfaJWPaPluxOFjgFNseKphffXeCxIzWsyfv9_oDUsXVUJfW7cMQ5lIVJljfBU5XK=w480-h640-no

Edited by Tharper
Link to comment
Share on other sites

Today we finished milling out the core boxes for the valve covers for Bob's FWD.

Again we used the Tormach 440 (Love this machine!)

 

If it is using Pathpilot then there is a bit of a coincidence there, I work on LinuxCNC.

Link to comment
Share on other sites

  • 2 months later...

Hello there Terry

Yes the pattern cover came from Tim Gosling a member of this forum and a superb restorer . Tim I will post it back to you when I have it in my possession. Waiting for the rims to be returned with new rubber. It has been 3 months wait time and still not ready> only ONE company here in the states is doing hard rubber tyres and the wait time is normal for them. In the mean time truck is up on a dolly and can be moved on a railroad track. IT has been difficult to remove the wheels as the bearings are not cooperating. will try hydraulic porta-power this weekend.

IMG_0446.jpg

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...