Jump to content

Land rover Snatch V8 Power steering Belt


Recommended Posts

Posted

Hi all,

 

I`m changing out my alternator and noticed the power steering belt very loose. Decided to buy all belts and replace them whilst the alternator was off. As per usual there is always something going against me.

 

The original belt i found fitted seems to be a 10mm x 925 Gate belt. Its either worn or not the correct belt. I say this as the adjuster is at max and the belt sits in the v pulley very deep. I google and came up with a belt ERC675 for the rover V8 that measures 13 x 925. This sits in the pulley better however I cant get it to fit over the pulleys. Im not a mechanic but I cant see how it would fit. I have backed the adjuster right back.

 

In my opinion its because of the pulleys on the snatch. The pulleys it has to get over are actually larger in diameter than the one it sits on.

 

Any ideas or confirmation of the belt others have installed for the power steering. Thanks

 

Colin

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...