eggsc8 Posted April 11, 2016 Share Posted April 11, 2016 Hi all , Has anybody greased the front Tracta units on a Chevrolet C60L , I cannot see where you put the grease it looks like you may have to remove the plate on the top which has about four bolts , I have yet to find a workshop manual for this lorry , Any help would be appreciated , Paul. Quote Link to comment Share on other sites More sharing options...
Pete Ashby Posted April 11, 2016 Share Posted April 11, 2016 Don't remove the plate on the top Paul this is the top cover for the king pins. What you are looking for is the small recessed slotted plug on the back of the ball housing remove this and screw in a grease fitting and fill carefully with liquid grease be careful not to overfill. Pete Quote Link to comment Share on other sites More sharing options...
eggsc8 Posted April 11, 2016 Author Share Posted April 11, 2016 Don't remove the plate on the top Paul this is the top cover for the king pins. What you are looking for is the small recessed slotted plug on the back of the ball housing remove this and screw in a grease fitting and fill carefully with liquid grease be careful not to overfill. Pete Thanks Pete , I will have a look after work tomorrow that is the only lubrication job i have left to do , I was pleasantly surprised to find all the grease nipples took grease , Not bad for a 1945 Motor , Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.