Graham Posted September 9, 2014 Share Posted September 9, 2014 I own an incomplete Smith & Wesson .38/200 BSR early 1942 (pre- Victory) revolver. Will some kind owner of a similar model kindly give me the dimensions of the main spring including its thickness. I have bought a few pieces of spring steel and hope to make my own. I also need a 'cylinder lock' if some one has to sell ( I would also be interested in buying an original spring). Thank you. Quote Link to comment Share on other sites More sharing options...
Chris Hall Posted September 9, 2014 Share Posted September 9, 2014 Isn't the Victory on the same frame as the M&P? Which is the same as the later designation Model 10 and K frame. I'll keep my eyes open. Quote Link to comment Share on other sites More sharing options...
Stanleyrf89 Posted September 10, 2014 Share Posted September 10, 2014 You could try http://www.marstar.ca they hold spares and will ship non FAC items to the UK, also try Helston Gunsmiths, although the price will be a little higher. Quote Link to comment Share on other sites More sharing options...
Graham Posted September 11, 2014 Author Share Posted September 11, 2014 Thank you both for your help. I have contacted Marstar and await their reply, but I do note that their website shows these items out of stock. I have asked Helston but they do not have any of these parts. Quote Link to comment Share on other sites More sharing options...
Enfield1940 Posted September 11, 2014 Share Posted September 11, 2014 Try here: http://www.gunsprings.com/index.cfm?page=items&cID=3&mID=58 They'll ship out of the US. Quote Link to comment Share on other sites More sharing options...
Graham Posted September 12, 2014 Author Share Posted September 12, 2014 Thank you Enfield1940. I have ordered the springs I need, so far so good. Quote Link to comment Share on other sites More sharing options...
Graham Posted October 2, 2014 Author Share Posted October 2, 2014 Just to update, I have received the springs, very expensive postage, fitted it and all working now. Just need cylinder stop, drawn a blank so far. Quote Link to comment Share on other sites More sharing options...
Enfield1940 Posted October 3, 2014 Share Posted October 3, 2014 Just need cylinder stop, drawn a blank so far. Their website currently appears to be ill, but Numrich has them listed and they'll ship out of the US: https://www.gunpartscorp.com/Products/375280B.htm Quote Link to comment Share on other sites More sharing options...
Graham Posted October 3, 2014 Author Share Posted October 3, 2014 Thank you for this latest information. Ordered one. Quote Link to comment Share on other sites More sharing options...
.thumb.jpg.181d77f7f70b3ba65da0a695e4e41742.jpg)
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.