Nitro Posted June 12, 2014 Share Posted June 12, 2014 Hi all. Can anyone tell me if it's possible to change a gearbox on my wc52 without removing the engine. Any tips would help no end. Thanks. Quote Link to comment Share on other sites More sharing options...
Nick Johns Posted June 12, 2014 Share Posted June 12, 2014 (edited) Yes you can take the gearbox out ok, remove the seats and cab floor, its then fairly straight forward, the engine is supported by the flywheel housing, the gearbox is attached to it by four bolts, remove propshaft, winch pto unit, etc then lower the gearbox out underneath, when putting it back engage the clutch release bearing onto the clutch fork pins Edited June 12, 2014 by Nick Johns Quote Link to comment Share on other sites More sharing options...
Nitro Posted June 13, 2014 Author Share Posted June 13, 2014 That's great. Thanks nick. Quote Link to comment Share on other sites More sharing options...
Nitro Posted June 22, 2014 Author Share Posted June 22, 2014 (edited) I've finally got round to having a good look at it before attempting to remove. From underneath on mine the hand brake assembly is only an inch or so from the cross member. Still it looks like only a few bolts to remove it. Edited June 22, 2014 by Nitro Quote Link to comment Share on other sites More sharing options...
bdodge Posted June 25, 2014 Share Posted June 25, 2014 Yes, undo the crossmember bolts and slide it bacwards as far as it will go.This gives you enough room to pull the gearbox. Last time I changed a gearbox on mine it was done in three hours from start to finish. cheers from Bjørn. Quote Link to comment Share on other sites More sharing options...
AndyB Posted June 25, 2014 Share Posted June 25, 2014 Nitro PM sent with an extract from the Dodge 6x6 TM on removing the Gearbox Regards Andy Quote Link to comment Share on other sites More sharing options...
arcot1751 Posted June 25, 2014 Share Posted June 25, 2014 Nitro PM sent with an extract from the Dodge 6x6 TM on removing the Gearbox Regards Andy Hi Andy any chance you could send me the same please mate ? Thanks - Dave Quote Link to comment Share on other sites More sharing options...
AndyB Posted June 26, 2014 Share Posted June 26, 2014 Nitro & Dave See PDF attachment Andy Gearbox_Dodge_6x6.pdf Quote Link to comment Share on other sites More sharing options...
arcot1751 Posted June 26, 2014 Share Posted June 26, 2014 Nitro & Dave See PDF attachment Andy Thanks mate :-D Quote Link to comment Share on other sites More sharing options...
Nitro Posted June 29, 2014 Author Share Posted June 29, 2014 Thanks all. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.