justinb Posted March 12, 2014 Share Posted March 12, 2014 I've bought a j60 for the cvrt project and i'd like to start it outside the vehicle ,what do i need to connect ,don't want oil and snotters all over the place and i'm not sure of the electrical side , justin Quote Link to comment Share on other sites More sharing options...
Topdog Posted March 12, 2014 Share Posted March 12, 2014 A good starting point would be a proper engine stand Quote Link to comment Share on other sites More sharing options...
justinb Posted March 13, 2014 Author Share Posted March 13, 2014 A good starting point would be a proper engine stand Its on the proper mod pallet with mountings so should be ok . I've seen mr donovans film on youtube but i can't see the wiring connections clearly ,and there must be something to stop oil pouring out of the hos connections. cheers .justin Quote Link to comment Share on other sites More sharing options...
sirhc Posted March 13, 2014 Share Posted March 13, 2014 Hi Justin, As long as the oil pipes for the engine are connected you don't need to worry about the gearbox ones. Send me a PM with your email address and I'll send some stuff to help you out. Chris Quote Link to comment Share on other sites More sharing options...
Tiffy_massive Posted March 14, 2014 Share Posted March 14, 2014 Never ran one outside the vehicle as with the fire walls removed you could see everything and get to just about any part requiring work. You would need some sort of oil feed and return system the basic electrical connections and depending on how long you want to run it for a decent coolany system bypass pipe. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.