bawtrylwt Posted November 9, 2013 Share Posted November 9, 2013 I need to change the o ring on the oil cooler of a rolls royce 305 eagle engine. Has anyone on here any experience of taking the oil cooler element out of the filter housing I have removed the two small screws but it still seems solid. Quote Link to comment Share on other sites More sharing options...
Southall wizard Posted November 9, 2013 Share Posted November 9, 2013 Hi there,you will need a block of wood and a bit of patience,you need to put the wood in the water inlet so it sits against the cooler and a few gentle taps on the end with a hammer should dislodge it.just knock it back far enough to remove o ring then knock the other way to remove o ring.it should then come out.make sure to clean housing and o ring groove apply a generous coat of rubber lube to o rings and refit. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.