private mw Posted February 20, 2011 Share Posted February 20, 2011 just found a kettenkrad on ebay ends in 2hrs can someone find link , i need to sell my house though ! :shocked: Quote Link to comment Share on other sites More sharing options...
private mw Posted February 20, 2011 Author Share Posted February 20, 2011 ohh ex saving private ryan one too , :-) Quote Link to comment Share on other sites More sharing options...
Toolman Posted February 20, 2011 Share Posted February 20, 2011 just found a kettenkrad on ebay ends in 2hrs can someone find link , i need to sell my house though ! :shocked: Here you go! http://cgi.ebay.co.uk/BRITAINS-LTD-GERMAN-WORLD-WAR-TWO-KETTENKRAD-MOTORBIKE-/190503953512?pt=UK_ToysGames_DiecastVehicles_DiecastVehicles_JN&hash=item2c5aeba468 Quote Link to comment Share on other sites More sharing options...
private mw Posted February 20, 2011 Author Share Posted February 20, 2011 funny but wrong one this ones £70.000 :red: Quote Link to comment Share on other sites More sharing options...
mash Posted February 20, 2011 Share Posted February 20, 2011 Try this 1 http://cgi.ebay.co.uk/1941-NSU-Kettenkrad-and-trailer-/330530698490?pt=Automobiles_UK&hash=item4cf52a34fa#ht_500wt_949 Quote Link to comment Share on other sites More sharing options...
private mw Posted February 20, 2011 Author Share Posted February 20, 2011 thats the one , Quote Link to comment Share on other sites More sharing options...
mcspool Posted February 20, 2011 Share Posted February 20, 2011 funny but wrong one this ones £70.000 :red: Why, if someone is expecting at least 70 grand, can't he be bothered to at least blow off the autumn leaves, let only properly clean it? :rolleyes: Oh no, wait, those are genuine SPR film set leaves and dust of course :yawn: Quote Link to comment Share on other sites More sharing options...
private mw Posted February 20, 2011 Author Share Posted February 20, 2011 nice but i might be able to buy the s.p.r dust , :embarrassed: Quote Link to comment Share on other sites More sharing options...
private mw Posted February 20, 2011 Author Share Posted February 20, 2011 talking of saving private ryan theres a medic costume on epay from the film props :wow: Quote Link to comment Share on other sites More sharing options...
steveo578 Posted February 20, 2011 Share Posted February 20, 2011 Just over 10minutes to go and no offers;) Quote Link to comment Share on other sites More sharing options...
private mw Posted February 20, 2011 Author Share Posted February 20, 2011 i will break open my piggy bank .:red: Quote Link to comment Share on other sites More sharing options...
steveo578 Posted February 20, 2011 Share Posted February 20, 2011 why kill the little piggy -as it got no offers perhaps it is overpriced:nut: capitalism/enconomics at work the price of any article will always reflect the demand in the market- supply and demand. Quote Link to comment Share on other sites More sharing options...
private mw Posted February 20, 2011 Author Share Posted February 20, 2011 i dont know are these priced around that figure seem quite rare :-) Quote Link to comment Share on other sites More sharing options...
Enigma Posted February 20, 2011 Share Posted February 20, 2011 I have a SPR helmet. Stamped ACAD which as i'm told means its used in the film. Nice to havethe kettenkrad too but not for that price... Quote Link to comment Share on other sites More sharing options...
Sidewinder Posted February 21, 2011 Share Posted February 21, 2011 Nice little machine there, shame about the price. As said above always makes me smile when sellers seem to forget that it doesn't matter what they believe something is worth, at the end of the day it'll only ever be worth what people are willing to pay! James Quote Link to comment Share on other sites More sharing options...
steveo578 Posted February 21, 2011 Share Posted February 21, 2011 Shortly after seeing this thread I looked on Milweb which isn't the cheapest place and even there there is stuff which has equal character for a lot less. But then I have to 'fess up -I'm not a great Wehrmmacht fan:red: Quote Link to comment Share on other sites More sharing options...
ajmac Posted February 21, 2011 Share Posted February 21, 2011 I have to 'fess up -I'm not a great Wehrmmacht fan:red: C'mon steve, their vehicles were much better than ours on every level, except that they missed a couple of little points, they didn't have to be the best, just good enough, easy to manufacture and maintain. Imagine if they had taken the Russian T34 design and understood what it was really about rather than just looking at the armour / gun. One gets the impression that lots of design engineers were involved with the Panther and not enough, production and maintainability guys! I read the wartime Tiger strip down report a few years ago at Uni, the engine section was fantastic, yet throughout the book I just kept thinking why so over complicated? I think someone must have been taking a back hander from the roller bearing manufacturers:-D Oh, while it's fresh in my mind, was the Panthers 75mm any good with HE? Quote Link to comment Share on other sites More sharing options...
Blackpowder44 Posted February 21, 2011 Share Posted February 21, 2011 German WWII vehicles were much too overengineered. For instance, the kettenkrad had two needle roller bearings for each track, the narrow track base made it very unstable on any sloping ground, I used to own one and in my opinion it wasnt much use. The germans could learn a lot from USA engineers as regards to dry pin tracks as opposed to their vastly overcomplicated track bearings. John. Quote Link to comment Share on other sites More sharing options...
steveo578 Posted February 21, 2011 Share Posted February 21, 2011 ajmacC'mon steve, their vehicles were much better than ours on every level, character has nothing to do with how good something is -I like churchills they are realy poor of the axis vehicles I go for TNHPS and other lessers types such as Turan. The HE round for a Panther is similar to other 7.5KWKs and had about 1.4lbs of explosive as opposed to the best allied 75mm the M48 which had about 1.5lb on the basis that a bang is a bang they are much the same and also range is similar due to a reduced charge being used for obvious reasons -hope this helps -if anyone wants to jump in if i'm wrong or off the mark please feel free to do so. Steve Quote Link to comment Share on other sites More sharing options...
steveo578 Posted February 22, 2011 Share Posted February 22, 2011 Blackpowder44 The germans could learn a lot from USA engineers as regards to dry pin tracks as opposed to their vastly overcomplicated track bearings. US tank track was a rubber bushed or bonded pin in all war service light medium and heavy tanks and as such was more advanced than anything else anywhere- it is in effect early form of live track at a time when other nations including Germany used a glorified door hinge:nut: for their tanks. US half/tracks used a re-enforced rubber band track rather than as you say vastly overcomplicated lubricated bearing track -debateable which would last longer in service but I dare say the US half/track was more economic whatever the automotive trial showed Steve Quote Link to comment Share on other sites More sharing options...
steveo578 Posted February 22, 2011 Share Posted February 22, 2011 Steveo578there is stuff which has equal character for a lot less. I really like the MH Mk4:flowers: on milweb just haven't got £10k to spare and more importantly anywhere to work on it:embarrassed: Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.