mkVsten Posted April 14, 2010 Share Posted April 14, 2010 I have the upper seatbelt/SMG mount, but I don't believe I have the correct set up for the two bottom attaching points. Would any one have a photo of the commanders seat belt installed in a ferret showing the lower mounting points. Cheers Quote Link to comment Share on other sites More sharing options...
griff66 Posted April 14, 2010 Share Posted April 14, 2010 (edited) will have a look. Edited April 14, 2010 by griff66 Quote Link to comment Share on other sites More sharing options...
john fox Posted April 15, 2010 Share Posted April 15, 2010 dont have pic to hand and ex[plantion probably hard to follow but you need a right angled curved plate which bolts under the seat guide rails and then the inertia reel bolts to the other bit of the right angle plate so the reel is then out to the side of the seat and below the seat level Quote Link to comment Share on other sites More sharing options...
sirhc Posted April 15, 2010 Share Posted April 15, 2010 I had loads of seat belt fittings kits, I might have some of these brackets left. I will check over the weekend. Quote Link to comment Share on other sites More sharing options...
griff66 Posted April 15, 2010 Share Posted April 15, 2010 i knew i had seen pics of this! go on fv701 web site click on interior of 00 cc 09 and u will find pics of what u r after> paul.:cool2: Quote Link to comment Share on other sites More sharing options...
mkVsten Posted April 15, 2010 Author Share Posted April 15, 2010 Thanks Paul, I see the little buggers now. Simple enough to fab them, but will wait to see if sirhc has some originals. Would prefer going that route with original parts. Photo below from Andys website for reference Quote Link to comment Share on other sites More sharing options...
ferrettkitt Posted April 15, 2010 Share Posted April 15, 2010 Thanks Paul, I see the little buggers now. Simple enough to fab them, but will wait to see if sirhc has some originals. Would prefer going that route with original parts. Photo below from Andys website for reference I am sure that I have some somewhere attached to a seatbelt I'll draw them for you if Chris doesn't come back to you any rush? Quote Link to comment Share on other sites More sharing options...
mkVsten Posted April 15, 2010 Author Share Posted April 15, 2010 No Rush, hopefully Chris comes up with a pair, I sent him a pm on it. Not so sure how useful a seatbelt is anyhow, but with a 13 year old sitting up there from time to time, it wouldn't hurt to have the belt installed and functional. One more item to take up valuble space in the Ferret... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.