Search the Community
Showing results for tags 'fire engine'.
Good evening, We are currently in the process of restoring a 1950's Dennis F12 fire engine but are missing some bits and pieces. Our main problem being that we cannot get any of the original style hinges for the locker doors which are are shewn below. Does anyone have some lying around or been through the process of having some cast? Additionally we require new hose for the reels on the roof, again if anyone has some lying around please get in touch! Kind Regards Lawrence
G'day, I've just acquired a 1960 Thornycroft Nubian 6x6 LFT which is originally ex-RAAF Townsville (North Queensland) but was recently recovered from a property out west. The original purchaser (property owner's father) had tried to drive it home after the disposal auction but smoked-up the middle diff around Woodstock (40 km from Townsville) and so the unit was then trucked back to the property and sat idle thereafter. I've been talking to the owners for the last 5-6 years about geting hold of it and finally an opportunity arose for a cheap back-load. It has been gifted to me on the basis that I will try to restore it as a non-profit venture, with the aim being to have it driveable and repainted (at least) so that it can take part in ANZAC Day parades/displays, historic military displays, re-enactments, airshows, etc. If the pumps can be made operational that will just be an added bonus. There were no manuals or other technical info with the unit so this will be one of the first priorities to acquire, the other being a secure undercover storage facility (currently tarped up on a friend's property in Townsville. I plan to publicise the project shortly to try and attract a group of volunteers and also begin the sponsorship/fund-raising process. It's a huge project but you have to start somewhere! There is another identical Thornycroft which I may be able to acquire from the same western area and a Townsville businessman has a third unit which he has tried to sell me previously (most recently it was on e-Bay again but failed to reach reserve). I am hopeful of getting at least two units so that we can mix-and-match to make one good one. I would greatly appreciate any leads/links for technical info, parts, photos of these in service (even RAAF Heritage Unit doesn't have any photos!) and other owners for networking - look forward to your responses. Regards, Christian. Christian D Smith Event Coordinator Ingham Wings and Wheels Airshow 0418 636727 firstname.lastname@example.org www.inghamwingsandwheels.com.au