Hi Guys,
Long story short one of my steering tillers starting pulsating slightly so i checked my steering brake pads and low and behold i am dearly in need of some new ones. I have the new pads and started replacing them, the one side went easy as pie and the piston slid right back into the caliper *almost* easy enough to do with your finger. Then the fun started with the other side. Despite all my might i cannot get the piston to press back into the caliper so i decided to take the caliper out so i can get at it better but alas i cannot for the life of me figure out how to get the darn thing out. From my limited understanding there is two larger bolts that hold the mount for the caliper onto the gearbox and i can find the one but i literally cannot break the bolt free. Ive tried liquid wrench, PB Blaster, Cheater bars, Half inch impact and lastly just my Raw Might but nothing will get it to come lose. so obviously i should just jump to the other bolt but i cant find it? im not sure if you guys know any tips or tricks but im in desperate need of help here.
P.S. If you guys know of where i can get a Fan Belt or a part number for a replacement that would be much appreciated it. Thanks in advance!