munga1
-
Posts
46 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Blogs
Events
Articles
Store
Downloads
Posts posted by munga1
-
-
hi all i am still messing around with my munga, but can anyone tell me the thread type and size for the fittings that go into the brake master cylinder oh and of course the pipe diameter
-
hi all i am still messing around with my munga, but can anyone tell me the thread type and size for the fittings that go into the brake master cylinder oh and of course the pipe diameter
regards
alex
-
ok i will take some pics tomorrow
regards
alex
-
hi all
i removed the ident nut on the top of the gearbox, but no better, i looked into the side plate and some gears have damaged teeth. but not sure if thats stopping it moving. but the damaged ones do turn
alex
-
hi
thanks
weather permiting i will try that on sunday, tomorrow
i will let you know
alex
-
hi all
after a long time trying to rebuild this machine i discover the gear box wont go into first and second gear, i seem to remember it was ok before.
anyway if anyone has a spare gear box, at a good price i would love to hear from you. i am rebuilding this on a shoe string.
regards
alex
-
hi
thanks for the answers about the clutch , but does any one know where to get a clutch pressure plate in the uk, second hand or new. I have part numbers
LUX 118-00009-20
SACHS 1882-140-002
its 180mm dia
thanks
alex
-
hi all
after checking what seems like every picture on the net I have the answer, all I need to do now is make the bracket that bolts onto the exhaust manifold
regards
alex
-
hi all
does anyone have a picture or drawing of how the cable fixes to the clutch lever, and what holds the clutch cable outer sheave .
I have looked at loads of You Tube videos and a workshop manual, but no where does it show the clutch cable set up.
if anyone has diagrams or drawings It would help me no end
regards
alex
-
hi
thanks for the answer. but I went out again and discovered that one of the butterfly valves was not closing correctly.
a little adjustment and it now seems to be running well, its a bit noisy tonight so I will run it more tomorrow.
thanks again
alex
-
hi
any suggestions out there. my two stroke engine wont run on idle, it only runs fast around 2000 rpm
the carb has been set up ok I think, I had stripped the carb twice to clean it, and set it up. according to the manual. there are no air leaks on the carb, and it starts first time but runs too fast
any suggestions
alex
-
hi
thanks ' the blue cloud '
but I don't have a spares list or workshop manual for the munga.
doing this rebuild on a shoe string and a lot of guess work
regards
alex
-
hi all
does anyone have a picture or drawing of how the cable fixes to the clutch lever, and what holds the clutch cable outer sheave
regards
alex
-
hi
for user '' the-blue-cloud ''
the only group of numbers i can find where you indicated are 3038 . 20 . 571612.
regards
alex
-
-
hi all
i have now found the missing part in a box of parts.
without the help on here it would have been hard to identify the part i was looking for
regards
alex
-
hi
'Ruston'. thats it, now i need to see if i have one of these with all the odds and ends i have with the munga.
'Blue cloud' i will look for that number when i get a dry day,
thanks every one for your help again
regards
alex
-
hi all
thanks for the pictures. but i still dont know what goes into the threaded hole on the right hand side.
hopefully this weekend i will get it cleaned up and serviced.
Oh and does anyone know if the cylinder head gasket can be re used or do i need to buy a new one?
regards
alex
-
-
hi all
where do you get an adaptor plate to fit the golf engine
regards
alex
-
hi
does anyone know if its easy to fit a Volkswagen bettle engine into a munga
regards
alex
-
hi
does anyone know where the indicator flasher unit is located on the munga?
thanks
alex
-
hi all
I am close to trying to repair the engine, but if its to far gone, is there an easy replacement i could use
regards
alex
-
hi all
i did look for the engine on e bay but no luck in finding it,
anyone know how to clean up name plates on the munga, mine are all white powder coloured and scared to touch them in case i loose all the text on them
thanks
alex
Munga
in German Vehicles
Posted
Hi Graham.
is the manual "The Munga repair Manual" I have that one but does not tell me the size of the brake fittings , But I know think they are 10x1.00 mm I bought a few from ebay that size to try them out.
thanks for your reply that's whats good about these forums you can get help
regards
alex