Jump to content

NIGELCOXY

Members
  • Posts

    61
  • Joined

  • Last visited

Everything posted by NIGELCOXY

  1. Got mine from Chestnut registrations,they were very helpful when i explained they were for an ex military vehicle.http://www.chestnut-registrations.co.uk. Nigel.
  2. Yes,thinking of selling mine,PM me if interested. Nigel.
  3. Another one saved,that is good news. Nigel.
  4. Hi Clive Looking back at earlier posts it looks like it used to belong to Adam Elkins. Nigel.
  5. Does anyone have any info on 03bk20 for sale on Milweb? Nigel.
  6. Thanks Clive,i really appreciate all your help. Nigel.
  7. Hi Clive Thanks for the quick response,yes it is a Jolley one with the aluminium base plate,so should be a straight swap then. Nigel.
  8. Electronic ignition kit turned up for the pig this morning so a few questions to anyone who has fitted one before i start. 1.The module is designed to be used in 12 volt negative ground system,the pig is 24v. 2.What is a HEI COIL? 3.Is there a ballast resistor on a pig. Sorry if these are simple questions but want to be clear on everything before i start. Thanks. Nigel.
  9. Thanks Clive,looks like i will be repairing the original one then. Nigel.
  10. Pig up and running again after hours,cleaned out all fuel lines and filter and have had to bypass the changeover valve which was the problem,has anyone replaced them with a landrover one,i know it will alter which tank you use with the lever but would it work? Nigel.
  11. It's the mark 2,thanks Clive and Richard. Nigel.
  12. Hi Clive I wish i had lived with a little petrol in the oil,seems to be a problem at the fuel change over tap,i have stripped everything out and no fuel seems to be coming through from either tank,there was me thinking it would be a simple swap.It must be bad luck or maybe ive got something down the end of the pipe when it was open.Will go at it tomorrow again now ive had enough for today. Nigel.
  13. Hopefully someone can enlighten me to what i am doing wrong....i decided to change the fuel pump on my pig as i was starting to get quite a bit of petrol in the oil,so bought a new one from Makano.Fitted it but couldnt pump and fuel through so cleaned out all pipe lines,still no fuel so thought it was a duff and put old one back on and same problem,wish i hadnt bothered.Is there something else i need to do and its not just as simple as swapping them over?Many thanks. Nigel.
  14. Thanks Clive,I don't know what we would all do without you. Nigel
  15. Could anyone tell me the type of oil I need to put in the steering box of my Humber pig please?
  16. Thanks Clive and Tony,much appreciated,i will be fitting it. Nigel.
  17. Thanks Clive,do you need to re set the timing after you have fitted it? Nigel.
  18. Hi All I am thinking of changing my Pig to electronic ignition and was wondering if anyone else has done this and how complicated it is to do.I have had a quote from Classic heads for £197.50+vat,would be very grateful of your comments on this. Nigel.
  19. Hi Clive Hope you get this as cant reply with pm as your inbox is full.1 is minibus,1 is saloon and 1 states not known and the piglet is mpv.Quite a variety really. Nigel.
×
×
  • Create New...