Jump to content

Tony Pearson

Members
  • Posts

    351
  • Joined

  • Last visited

Posts posted by Tony Pearson

  1. Was after soom help on how to mount a jeep side step gun mount just bough one and cant seem to see how it fits. The mount hits the windscreen when putting it up or down and can get all hols to line up on the step. Dose anyone have pictures of one fitted so i can see how it goes.

     

     

    Cheers tony

  2. I no what its like mate just spent ages getting mine running and turned out to faulty plugs in the end new ones at that. Mines was doing a very simular thing and yours sound elecrtical like mine would check timing as suggested get it up to tdc on number one check timing mark on pully and you rotar arm should ablut 7 oclock on the dizzy cap. if your ok there check all your plugs are sparking correctly. they may do out as mine did but when its running pull a lead off one at a time and see if the engine nose changers if not that your faulty item.

    keep tryinh you will get there as i did

  3. It runs :-) :-) :-) :-)

     

    Plugs 4 of the new plugs were faulty replaced them with some out of my jeep and she fires stright up and runs like a dream.

     

    just want to say a big thnakyou to everyone who has helped me with this.

     

    So remember start simple

     

     

    Thanks Tony

  4. Geeting worse

     

    had carb stripped down and refitted it told there seems to be nothing wrong with it. went to start and after a few turn an almighty band a backfire. plugs are now wet timing is right spark, just dint know now. Think i need to get it to a doctor out of my league now. dose anyone know a good mechanic around my area who would come and have a look for me as i am lost

     

     

     

    Cheers tony

  5. Right got a bit more on testing out some of your ideas but thing get stanger. ran a compresion test and all coming out between 8-9 Bar which is ok buy my manual. checked spark again and got a good spark but now wont fire up at all and now seems not to be getting nay fuel i have stripped doen the carb but all seems fine no sticking float or anything. What i habe found now that after turning it over for a while that there is fuel coming out of the pipe that goes from the inlet manifold to th block ( no idea what this dose). Any more suggestions would be greatly taken dont know if to try a new carb. :? :? :? :?

  6. Sorry maybe did not put much information on as i should im in south yorkshire/lincolnshire area. What have done so far well replaced all electrics eg distributor cap points etc new leads plugs, rebuilt carb, replaced all gaskets eg head gasket exhaust inlet etc. ran head gasket leak test came back fine. Basicly its runs rough and throws out a lot of white smoke going grey when you rev it.

    Any help would be great.

     

     

    Thanks tony

  7. >:( >:( Dont know if anyone can help i have a WC52 and its has not been running right from day one so i have stripped it downas i was told head gaskets was bad. Built it all back up again and now it runs worse than before. It smokes like a large green smoke machine and misses all the time. i am a bit out of my depth now dose anyone know anyone who may be able to repair her for me.

    Any help would be greatly recived

×
×
  • Create New...