beepbeep

On 6/30/2023 at 4:30 PM, RWSScarb said:

I was just wondering if anyone knows of a crawler forsale in the UK?.

Hi, did you get fixed up? A friend of mine has the best part of two dozers with a shed load of spares he’s looking to sell. It’s a project but there’s everything there to make one good dozer with plenty of leftover parts to sell on

Chris

North Hants Tyres stock Firestones and Grays Automotive list the size but not the brand

Push both transfer case levers forward

On 12/20/2020 at 4:39 PM, Salty said:

Tires are bf goodrich.Thanks for your help.

That’s ok. I’ve just realised from your spelling of tyres, you’re in the US? If so a lot of ‘European Returns’ have made their way back over the years. Your tyres may have been fitted in Europe but hard to tell, I’ve got Norwegian retread Goodyear’s on my Dodge and Swiss made Firestones on my GMC. Would be interesting to see some photos of your truck

20 hours ago, Enigma said:

Got a photo?

 

Did you want photos of my plates or of the OP’s plates?

9 hours ago, Salty said:

So how do you think it got back over here. Do you know how we get build card.

Here’s a link to a page with the address to write to for a copy of your build card. You’ll need proof of ownership and pay a fee. It’s ten years since I got mine so the procedure may have changed. https://www.command-car.com/technik/technikbuildcards.html
If your truck has come from Switzerland it’ll have been painted dark grey at some time, if there’s no sign of that chances are that it’s not Swiss. Check your tyres as well, the make can sometimes help with where the truck came from. Mine came from Norway but the French Army also used them

The chassis number indicates an April ‘43 build date as well, another pointer that it’s been a post war rebuild

Just a guess but the plates are in German/French, there was a French Army rebuild factory in Friedrichshafen in Germany but the rebuilds I’ve seen from there have a CRAS plate on them

3 hours ago, Salty said:

1944 wc 51 I purchased has German dataplates on dash.Did dodge sell to the Germans.

No they didn’t, probably rebuilt post war in Germany or possibly ex Swiss Army but I’m not sure if they used Dodges. As Adrian says, photos would help

3 hours ago, Enigma said:

Got a photo?

 

I’ll get photos tomorrow and post them 

On 12/17/2020 at 1:23 PM, Salty said:

I have  a 1944 wc 51 with German badges on the dash.Does anyone know why that would be on an american military vehicle.

You should have started a new thread with this query but quick answer is a lot of US vehicles were rebuilt post war in France, Germany and the UK. My own 1944 WC51 was rebuilt in Germany in 1953 but has a US Ordnance rebuild plate on the dash and a German plate on the bed

Yes, I’ve bought a lot from Jeepest, their parts are good quality and they offer a good service. As you say though French post is expensive

They are still in business but they’re very slow to respond to emails. I’ve started emailing them in French and they do seem to answer a little quicker. As far as what they’re like to deal with, I’ve dealt with them for the past 9 years. It’s been a very mixed experience, some of their parts are ok but I’ve had some stuff from them which was worse than what I was replacing and I now only use them if they have parts I can’t get elsewhere. Also their shipping costs are horrendous, 27 Euros minimum charge for even the smallest part

There you go, very simple but it worked. I made a dummy disc from MDF but it would be just as easy to jigsaw a hole in the board and use your disc.

You say that with full adjustment of the free play you have one arm nearly touching the release bearing and two with about 5mm gap. When I adjusted my pedal free play to the factory spec (1 1/8”) I think that the travel on the release bearing was about 3/8”-1/2” before it touched the arms.

You’ll need a digital calliper to set the arms and the spec including spring pressures, clearances etc is in TM9-1808A

Chris

I had a slightly dragging clutch on my Dodge when I bought it and on the advice of someone on the WW2 Dodge forum I adjusted the release arms and it did the trick. Just drop the clutch housing cover off underneath for access, the nuts are staked as already said but they moved easily enough and didn’t move any further despite not being staked again. Out of interest I’ve just totally rebuilt my clutch cover as part of a driveline refresh and made a jig out of 18mm ply and coach bolts with a dummy clutch plate made from mdf.......worked a treat!

Chris

From the photos, which parts are you missing? PM me your email address and next time I'm up at the storage I'll take the parts off and template them on a piece of A4

Chris

Don’t think the parts are available but they don’t look too hard to fabricate. If you need any measurements etc let me know

Chris

Oh and I use RH Insurance in Essex, been with them over 20 years. We paid about £150 last year for me and my son on the policy

Hi diggerdog, just seen this and as pointed out no claims doesn't come in to it. You do however, need a 'daily' to get a classic policy. Don't know where you're planning on keeping a GMC but my son has one and we saw the premium go up when he brought it home from storage just outside of Ponteland, my Dodge insurance has shot up this year as well and when I queried it I was told that there's been a re-assessment of our postcode  call in sometime if you want a chat or advice, you know where I am

Chris

Hi, yes I've still got the Dodge but it's been off the road for the past year with engine problems. Finally found the time to finish the work on it at Easter and just waiting for a new battery to come then it'll be coming out again, hopefully for the Blyth Battery event in two weeks :cheesy:

astonishing that I have learnt so much from the start of this thread. i don't blame you reproducing Photo 30 - it makes a great subject. It was my first choice for marking my WC.

 

(Another of Eddie Urban)?

 

[ATTACH=CONFIG]121878[/ATTACH]

 

[ATTACH=CONFIG]121879[/ATTACH]

 

Pictured in front from left to right are: Walt MacDonald and Eddie Urban ( Eddie was a movie man). In the middle is Gene Coogan; at the right is J Malan Heslop; behind from left to right are Arnold Samuelson and John O'Brien.

If you ever need correct props, cameras (working or prop)and photo equipment and spares, I have the lot especially Graflex and will always help the genuine Signal Corps and War correspondent enthusiast. (google "ikonta bloke")

 

Hope to see you out there in your lovely WC

 

news flash!

 

J Malan Heslop archive is at Brigham Young University Website. 80 pages of stunning photos. All of his output digitised. Enjoy

 

[ATTACH=CONFIG]121917[/ATTACH][ATTACH=CONFIG]121918[/ATTACH][ATTACH=CONFIG]121919[/ATTACH][ATTACH=CONFIG]121920[/ATTACH][ATTACH=CONFIG]121921[/ATTACH][ATTACH=CONFIG]121922[/ATTACH]

very kind of you and thanks for the photos. That's what I love about this hobby, the history and stories behind our trucks and the great people you meet through owning them. My Dodge was laid up for most of 2016 so I'm aiming to make it to some shows this year......hope to see you somewhere!

chris

Photo 30 was well covered...... thanks for these. Have you more on yours in detail... cheers

 

Are you camera crazies too........?

 

[ATTACH=CONFIG]121810[/ATTACH]

Not a huge amount more to tell about my Dodge...... I have a great interest in US Signal Corps as my dad served in North Africa and Italy as a linesman with the Royal Signals and was attached to the US 5th Army. Ultimately I want to mark my truck up as a unit that would have been in Italy at the time my Dad was there but for my trip to Normandy in 2014 I wanted to mark the truck up in markings of a Signal Corps company that would have been there in '44. I found the photos I posted above and marked my truck up as 'PHOTO 30' as my own Dodge is the same down to the position of the Jerry can, rifle rack and pioneer rack. After coming back from Normandy I discovered that 'PHOTO 30' was built within days of my own WC51 and now, thanks to your photo above (which I've now found online) I now know that the driver was Eddie Urban and that he probably trained at Camp Crowder! Here's a couple of photos, the first taken in Normandy with a period camera and the other, a Camp Crowder cushion cover I picked up on eBay last year

And from the research I did at the time I seem to remember that 166th was Patton's 3rd Army Signal Corps company........and yes, here's a Belgian site with a lot more background info http://www.combatcamera.be/combat-photography-units/166th-signal-photographic-company/

Just seen this, here's a few images of Signal Corps photo Dodge WC51's and my recreation of a WC51 of the 167th Signal company for my trip to Normandy in 2014. The original photos are courtesy of Military Mashup and could maybe be taken in Germany in 1945?

As above, traditional anti freeze! I use Prestone....£12 for four litres from Costco!