poppypiesdad

Google fu is your friend . A Bit off a tent http://www.iso-group.com/NSNDetail/8340-99-122-5532/8340991225532.aspx

Thank you Richard I'll have another look tomorrow Jamie

Hi all and hi Clive the only numbers that I've found on the engine was a small plate 1/2"x1" on the drivers side of the rocker cover just below the tappet clearance information plate. I think it reads RE15056 and underneath FV141926 ( very small writing ) and this one on the bulkhead passenger side on the exhaust manifold side there was this plate on the exhaust manifold side there was this plate

yes it does stop ,sort of, but i only drove it inside and very slowly

Well after spending most of the morning trying to start the PIG i admitted defeat and got her lifted to base. After unloading started to tinker and tried again and it bloody started god i got such a fright and what a noise. So its tidy time first job i think is to get the fuel tanks off and cleaned internally and get all the rubbish out of them . Jamie

Touchdown

movement we have movement

pm 'ed

Hi all just a quick update YES the ferrets Yes TWO of them are for sale. Please PM me and I'll forward the sellers details on to you. They are both in Scotland nearest town to them is Kirkcaldy, Fife , Just north of Edinburgh. Regards Jamie

What a fantastic welcome, the wealth of knowledge here is simply staggering and the help that i have received so far in so few posts is astounding . Thank you everyone Jamie

thanks clive i'll bear that in mind , no luck with the plates and the erm number will have a look at the engine for a number tomorrow jamie

Well now i know why they are called PIG's . It took 2 hours to get the fan belts on, only one stripped knuckle. Also I drained the fuel tanks and was there a lot of grunge that came out so I now have 30 odd liters of petrol to start bonfires with. Emptied the fuel filter out and topped back up with fresh petrol. And topped up the radiator it only took 2 litres of water and when it was full it was good to see blue antifreeze so the system should have had some protection. Topped up the brake fluid , changed the oil in the air filter , what a great set up never seen anything like that , the nearest is a K&N filter. And boy am i glad that I've got imperial as well as metric spanners and sockets, things you never think about until you do something like this. Tried to start it but slight problem the batteries I took down had about a ant's fart of a amp in them but still there's always tomorrow , better go and get the charger out . And that's today at the pig covvies for the wash , and a cold beer Jamie

Thanks all for all the help to a noob

Hi Guys would this be a accurate transfer from military stuff to civi over the counter stuff. To suit a PIG FV1611 MILITARY REF >>>>>>>> DESCRIPTION >>>>>>>>>>>>>>CIVILIAN REF OMD110>>>>>>> Oil Mineral Detergent to Mil 2104>>>>>>> SAE30 OMD75>>>>>>>> Oil Mineral Detergent l0-W-30 multigrade >>10-30 multigrade OMD8OX >>>>>>> Oil Mineral Very high detergent Diesel oil >> 10-40 Multigrade 0EP220 >>>>>>>>> Oil Extreme Pressure >>>>>>>>>>>>>>> EP90 or 80w-90 hypoid OM13>>>>>>>>>>> Oil Mineral Hydraulic >>>>>>>>>>>>>>>> ISO 1 5 not SAE I 5 XG279>>>>>>>>>>> Calcium based grease>>>>>>>>>>>>>>> Calcium based grease OX320>>>>>>>>>>> Calcium Graphite in Suspension>>>>>>>>> Moly-Gear or Slick 50 ' PX7>>>>>>>>>>>> Yellow Petroleum jelly >>>>>>>>>>>>>>>>>>>> Vaseline OX8 >>>>>>>>>>>>>> Brake fluid>>>>>>>>>>>>>>>>>>>>>>>>>>>> DOT4 AL39>>>>>>>>>>>>>> Methanol-Alcohol>>>>>>>>>>>>>>>>>>>>>> Anti-Freeze AL11 >>>>>>>>>>>>>>>> Screen Wash>>>>>>>>>>>>>>>>>>>>>>> Screen Wash

Thanks Clive I'll bear that in mind

i really like the trailer and the look of the whole set up are the trailers readily available and what do they connect to a NATO hitch ????

I can ask for you if you like pm me your number if you want me to pass it on . The only plate inside is one the bulkhead that says serial number S525 and something like FV 1611

are they not rocking horse pooh or can you still get them ???

Hi all , has anyone on the forums got detail's of sizes of fan belts for a humber pig A local firm does all sizes , and apart from a bit of string im lost . Have googled it with no results All help would be appreciated Jamie

some more pics

Hi all thought id start a blog even though I've not got it home yet . It's a humber pig but apart from that i know very little . Have read up on others blogs here and wonder if anyone could shed some light on it's past as I see that someone can go backwards from the Reg.No and find out about there past's Anyway here's some pics to be going along with

No one of a pair that the last owner of the pig bought i believe 2 years ago at W+P show and has did very little to them .

sorry if there stupid questions but im a noob around here

Where's the best place to post pic's as it's going to be a restoration ?? Thanks in advance Jamie

Hi everyone :saluting: , jamie (aka poppypiesdad) long time lurker but now i've taken the plunge and got myself a pig. Just need to get it transported from kirkcaldy to the workshop so i'll be nagging for help soon Jamie