Jump to content

hauptmanngurque

Members
  • Posts

    53
  • Joined

  • Last visited

Everything posted by hauptmanngurque

  1. I was unaware of Richard's death... the last time I ordered something must have been at the beginning of the year, and I noticed a certain slowness in shipping and treatment in general. but the spare parts arrived perfectly.
  2. Interesting about soaking them in hot water. Personally I do the same but with previously heated hydraulic fluid (warm) I will try water next time!
  3. Hi Simon. I could help you with that, since I have done it recently. But I think Shirc put it on a plate for you... Two observations if you can't find the Min19 seals at that supplier, Richard Banister has them. If you do not have practice changing the master cylinder seals, purchase a few more sets than you need, because it is easy to break one of the rubber seals when assembling it. If you think the master cylinders are too bad to recover, you also have them new or rebuilt at the usual dealers.
  4. bronze coated steel. For civilian life, I sense that sintered bronze can be good, at least it won't cause so much wear on the pivot axis. of course in the Mod. It does not appear that they were given adequate maintenance, certainly not in their last few years in service.
  5. I am glad to know that you are mounting the sleve bearings and that these 3 inch ones fit correctly. In principle there should be a difference of a few tenths with the originals. I am in your same situation and I am waiting for a complete set of them to proceed with the change.
  6. If you are looking for sealing, I think it is important to change the rear pivot axle seals, or at least their rubbers (personally some of mine are mounted wrong and with deformed rubbers) but these are difficult to find. The O-ring that sits in the pivot axle channel is a standard size (BS334) in X-ring or quad-ring version (in mine some of them were normal round o-rings) of course it is essential to change the sleeve bushings for new ones. any excess play in the pivot axle will have an effect on the lack of tightness of the assembly. By the way, the 3-3/16 sleeve bushings have a slightly smaller external diameter than the original ones.
  7. Probably the easiest thing is to take them to a local supplier who will look for them, or manufacture them to measure.
  8. Well... since they seem to be hard to come by... I made a new data plate out of cast aluminum. this is not as high quality as the original, but a great repro.
  9. Hi. I'm disassembling final Drive of my scorpion. Any comercial reference for this seal? Nr.27 in the pic Thanks
  10. Looking for an internal data plate for my Cvr t Scorpion. I'm sure someone keeps some of them ... even with good luck it could be mine ... 04FD24
  11. This engine was later used in export vehicles. Those used in Spain also mount the T6-3544 engine
  12. talk to Robert Dove ... maybe it has something of your interest...
  13. now one in Ebay.... https://www.ebay.co.uk/itm/CVR-T-Charging-panel/154335075266?hash=item23ef165bc2:g:qq0AAOSwtYNfwOT-
  14. Everything uses OMD 80 - OMD90 equivalent to SAE 30 and SAE 10/30. probably SAE 15/40 is fine, but in the gearbox I would prefer to use SAE 30 or 10/30...
  15. Thanks ltwtbarmy I know that these two stores have NOS in stock ... but I'm really looking for something less expensive ... actually it is a part that has no effective use, except to complete the interior of the turret ...
  16. A well-spent time ... and this was on the list of pending jobs. finally I disassembled them almost completely and proceeded to a deep cleaning by ultrasound ... also change the damaged socket and and grease the collector tracks with Stabillant 22 now there is continuity in all circuits!
  17. One of the missing boxes inside my project is this. Does anyone have an abandoned one on the warehouse shelf? Regards and thanks...
  18. Hi Clive thanks for your quick response.: Sight, Periscope, AV, Image Intensified, L3A1
  19. Anyone with experience in CVR T scorpion mounted night sight? I need to rebuild the wiring that connects it to the night sight control box (it was cut off) so the 19 pin plug is missing .... Does the connection diagram appear in any manual? I also think that my night sigt control box is inadequate (only two sokets) which I think is the one used in 30mm ... someone to enlighten me about it? Regards and thanks....
  20. Congratulations and welcome ... I saw the videos of your vehicle. Andrew is a good guy, sure they have done a great job on the vehicle , this looks good you are lucky to be able to drive it, my cvr (t) is still a project and there are many days left so he can move on his own ... Regards...
  21. You currently have one on Ebay, status unknown .... but for only 15GBP .... https://www.ebay.co.uk/itm/FV141517-IGNITION-BALLAST-RESISTOR-BOX-COMMON-TO-FERRET-CVRT-FOX-CHAMP-etc/164121411640?hash=item2636660038:g:rUEAAOSwV7Zeahtk
  22. Rob is a great guy ... and he knows very well cvrt ... You may find it cheaper, closer, but maybe they need twice as much time to do the same job worse! think about it
×
×
  • Create New...