paul connor Posted March 6, 2020 Share Posted March 6, 2020 Does anyone happen to have the tolerance and assembly specifications for the T236 Dodge/Chrysler Canadian engine? I can only find a simple assembly manual, and not the full 'power' manual with bore/crank tolerances. I have for T214 and T112, this seems illusive as was Canadian. It must exist as these units (¾ APT/WP) went to Norway after the war. Thanks Paul Quote Link to comment Share on other sites More sharing options...
Gordon_M Posted March 6, 2020 Share Posted March 6, 2020 I don't have anything here Paul. If I remember correctly the 236.6cu in engine was virtually identical in the T222 and T110 series vehicles, probably updated slightly for the APT which was several years later. Quote Link to comment Share on other sites More sharing options...
MatchFuzee Posted March 8, 2020 Share Posted March 8, 2020 Have you seen this? https://p15-d24.com/topic/51548-t236-engine-part-of-the-25inch-family/ Quote Link to comment Share on other sites More sharing options...
paul connor Posted March 14, 2020 Author Share Posted March 14, 2020 Thanks for the replies. I have no resolved the issue. Vintage power wagons, USA have a Chrysler engine manual. So will be ordering one. Thanks again Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.