steve od Posted September 3, 2019 Share Posted September 3, 2019 I need some trailer wheel nuts a wheel bearings can anyone help thanks Quote Link to comment Share on other sites More sharing options...
2691H Posted September 3, 2019 Share Posted September 3, 2019 In 2003 rebuilding a Dingo I used a firm called berniebolt@talk21.com. to make all the fixings that had to be cut out or re-made. Contact them and send a sample of your requirements. I have just checked companies house and the company is still listed. Bernard F Wade Ltd, PO Box 1865, Oxspring, Sheffield, S36 8BY 01226 370860 Every thing I sent was supplied or re-made in good quality at a fare price. Cheers Michael Quote Link to comment Share on other sites More sharing options...
MB1944 Posted September 3, 2019 Share Posted September 3, 2019 Hi I have just put new bearings in my N0.1 Mk.2 lightweight trailer, they are easily available from bearing suppliers. I can post the bearing numbers tomorrow if you would like them. Best regards John Quote Link to comment Share on other sites More sharing options...
steve od Posted September 3, 2019 Author Share Posted September 3, 2019 That's very helpfully thanks Quote Link to comment Share on other sites More sharing options...
MB1944 Posted September 4, 2019 Share Posted September 4, 2019 Hi The bearing codes are: outer bearing code 09074/09196 Inner bearing code 14125A/14276 When I gave them the original codes they could not recognise them, so I had to measure them myself and identify the codes from websites, but they are a perfect fit on the job. Any bearing supplier should be able to get them for you. Best regards John Quote Link to comment Share on other sites More sharing options...
steve od Posted September 6, 2019 Author Share Posted September 6, 2019 Also need leaf spring bushes / shackles and shackle bolts any help with spares much appreciated Quote Link to comment Share on other sites More sharing options...
steve od Posted September 11, 2019 Author Share Posted September 11, 2019 On 9/3/2019 at 7:27 PM, MB1944 said: Hi I have just put new bearings in my N0.1 Mk.2 lightweight trailer, they are easily available from bearing suppliers. I can post the bearing numbers tomorrow if you would like them. Best regards John Just started striping the hubs how Did you get the bearings out of the hubs Quote Link to comment Share on other sites More sharing options...
MB1944 Posted September 11, 2019 Share Posted September 11, 2019 Hi Steve With great difficulty, some came out with an internal bearing puller, of the collet type attached to a slide hammer. Others I had to weld a bar to the taper inside the cup and knock them out from the other end. In better setups on machinery etc. there are usually relief slots in the diameter behind the bearing that allow you to use a punch to knock them out. Good luck John Quote Link to comment Share on other sites More sharing options...
Niceonetidy Posted September 11, 2019 Share Posted September 11, 2019 If you weld a small bead of weld around the inner bearing surface they will fall out, Some Tractor spares places have replacement wheel nuts that may work, Quote Link to comment Share on other sites More sharing options...
steve od Posted September 11, 2019 Author Share Posted September 11, 2019 Thanks I'll do that Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.