frankandhistank 10 Posted February 9 Im hoping someone can help, i am trying to find out the points gap setting for the three sets of points for my munga, ive fitted new, but unsure of the gap to set, thanks Share this post Link to post Share on other sites
MatchFuzee 16 Posted February 10 If nobody answers your question, you may find this site useful:- http://www.dkw.org.uk/ Share this post Link to post Share on other sites
frankandhistank 10 Posted February 10 thanks for that Share this post Link to post Share on other sites
mogmaner 10 Posted February 11 Will check my hand book when I get home this evening. Share this post Link to post Share on other sites
frankandhistank 10 Posted February 11 thank you, did you see my post with regard to the carb, any help appreciated Share this post Link to post Share on other sites
mogmaner 10 Posted February 11 The munga carb is very similar to the 404s unimog, so over hall and tuning should be similar. Share this post Link to post Share on other sites
Baz48 12 Posted February 11 From memory there are two carb types fitted on a Munga - one where the two-stroke oil is mixed in the petrol tank with an agitator the other when the oil is pumped from the oil tank under the hood to a point between the carb and the inlet manifold - my Munga had the first type and spares for the carb were readily available Share this post Link to post Share on other sites
