Markheliops Posted December 12, 2018 Share Posted December 12, 2018 Hi all. Happy Christmas everyone. Does anybody have access to CVRT repair manuals? I'm overhauling a CVRT Scorpion and the only manual I have to hand is the Operators manual. I am in the process of refitting the gearbox after fitting a new clutch unit and I am aware installation and specifically alignment is critical. Memory is telling me the clutch input shaft has to be 9 15/16 from the hull floor (I read it somewhere) but other than that I'm in the dark. I'm also overhauling various other components and I don't like tinkering without the correct manuals. I have searched on line but there aren't any repair manuals for the CVRT petrol range available. Many thanks Markheliops Quote Link to comment Share on other sites More sharing options...
0 Diana and Jackie Posted December 12, 2018 Share Posted December 12, 2018 There's a better way than that. Get yourself a small digital spirit level, measure the angle of the fan drive pulley, adjust the gearbox to have the same angle. The Fan drive belt will now not run to either end of the fan drive as both drives should be parallel, Job done. Diana Quote Link to comment Share on other sites More sharing options...
0 fv1609 Posted December 12, 2018 Share Posted December 12, 2018 Mark I assume it is J60 you are after, you will not find the engine in detail in EMER TRACKED VEHICLES as you might expect but in EMER POWER S 570-579. I have these in microfiche but there is a printed version here: https://www.greenmachinesurplus.com/cvrtcvrwj60-petrol-engine-emers-211-p.asp Quote Link to comment Share on other sites More sharing options...
0 Markheliops Posted December 12, 2018 Author Share Posted December 12, 2018 Thank you Clive and Diana. These manuals seem to be the holy Grail...………. Quote Link to comment Share on other sites More sharing options...
Question
Markheliops
Hi all.
Happy Christmas everyone.
Does anybody have access to CVRT repair manuals?
I'm overhauling a CVRT Scorpion and the only manual I have to hand is the Operators manual.
I am in the process of refitting the gearbox after fitting a new clutch unit and I am aware installation and specifically alignment is critical.
Memory is telling me the clutch input shaft has to be 9 15/16 from the hull floor (I read it somewhere) but other than that I'm in the dark.
I'm also overhauling various other components and I don't like tinkering without the correct manuals.
I have searched on line but there aren't any repair manuals for the CVRT petrol range available.
Many thanks
Markheliops
Link to comment
Share on other sites
3 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.