Jump to content
Jessie The Jeep

Taylorcraft Austers - MkV and J/1N

Recommended Posts

Here's a couple of 1/72 scale Taylorcraft Austers I finished late on last year.

Auster Mk.V

The first is a Mk.V, modified from the AZ Models Mk.III kit. A new flat four cowling was made, upper canopy glazing modified and a wing mounted generator added. A belly fuel tank was also made. This apparently wasn't factory fitted, but a factory produced upgrade that could be fitted during manufacture or at a later date by a certified engineer. I couldn't find any roundels of the correct size for the fuselage side, so had to go slightly oversize on that one.

auster_2017_001.jpg

auster_2017_002.jpg

The fullsize example the model was copied from.

auster55.jpg

 

Auster J/1N

This conversion was also from the Mk.III kit. This version used the kit inline engine and cowling, but had a scratch built exhaust. Once again, the canopy was modified, along with the rear decking. It too had a wing mounted generator. Inner wing ribs were sanded down and a fuel tank filler cap added as this aircraft had wing tanks fitted to extend the range.

auster_2017_003.jpg

auster_2017_004.jpg

The fullsize Auster J1N

auster20.jpg

 

 

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...