Jump to content
Yeoman

WW2 R1155 receiver

Recommended Posts

Hi All,

I am  looking for a WW2 R1155 receiver as used in Lancaster bombers, for displaying at shows and was wondering if someone could kindly let me know what voltage they would have originally run on - 6,12 or 24v?

Thank you.

Kev.

Share this post


Link to post
Share on other sites

6.3 v dc for the heater and 230v dc for the ht hope this helps

20170514_133346.jpg

Share this post


Link to post
Share on other sites

Hi Mogmaner,

Thank you for your helpfull reply - by the way - nice set up you have there.

To you experienced guys this is probably a very silly question but showing my lack of knowledge on this subject - if I wanted to use  an r1155 radio receiver at a show - how would I power it up? As it needs 2 different voltages will I need a transformer of some kind? I had origenally thought that I could power this from a 12v battery, this would appear not to be the case.

Any help or advice would be much appreciated.

All the best,

Kev.

Share this post


Link to post
Share on other sites

You will need either a 240v mains supply unit or a 12v battery supply unit. Either of these will have to be made unless you are lucky enough to find one that someone else has made. There are plenty of designs out there on the net but if going the 12v battery route be aware you will need a big battery. If for use at a show a mains powered unit might well need PAT testing by the organisers so needs to be properly made, not lashed up out of bits.

Find and talk to your local amateur radio club, most clubs will have at least one person who has done this.

 

Gordon

Share this post


Link to post
Share on other sites
Posted (edited)

Hi Yeoman.

I have at least 4 off 1155 receivers and 2 x 1154 transmitters in my stores. Also I believe there is a well made more modern mains power unit. All of which are for sale as I am now downsizing my collection.

Note that 1155 (and some 1154) sets were used in many ground, air and sea roles during WW2. The real aircraft ones are worth more money. Look for the aluminium casing as well as the A M plate on the front.

PS I also counted at least 20 off 19 sets, all with power packs, dog bone and ATU and piles of accessories.

Plus 4 or 5 Larkspur  backpack sets, all different (valve sets of course).

Jon

 

R1155-1.jpg

1 021.jpg

1 022.jpg

1 023.jpg

Edited by FourFox
Wrong name. Sorry

Share this post


Link to post
Share on other sites

I youse mains when I can, but if not I have 2 invertors  from 12v to 240v ,one rotary military  the other is transformer based yousing  a good quality transformer and invertor driver board of the web .The cheap invertors you can buy create to much interference, 

20170514_130056.jpg

Share this post


Link to post
Share on other sites

Hi Guys,

Thank you all very much for your informative replies - they have certainly given me some pointers and things to think about.

All the best,

Kev.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×