Universal Carriers blueprints/ books etc

[bigduke6 10]

Does anyone know a good source of Drawings/blueprints of the Universal carriers 

I've been looking for the plans for the hull with sizes and gauge of the steel etc, 

I,ve seen 3 books by Nigel Watson and the 3rd Volume looks like it has what I'm looking for just wonder if anyone has the book and if it has the detailed plans of the hull.

 

[PB1954RNS 11]

Hi. Don't know if this is any good to you not being 100% on carriers, but the National Archives have a hull drawing of a Bren  Carrier No2, MK 1/L and MK 2/L.  Classed as a large drawing Record No WO 194/154 and dated Dec 1938.

Any help.

P.B  

[bigduke6 10]

Thanks PB will have a look. 

 

[Bob Grundy 12]

The drawings that you will hopefully get are for the pre-war 'Bren Carrier' and not the usual common or garden Universal Carrier. There are only one or two of these in the entire world as far as I know, one is in Australia. If you are going to make one of these actual Bren Gun Carriers then its wonderful, you have my admiration and good luck!

[Bluebell 10]

Bob there are a total of only 3 real Bren Carriers left on the globe. There are two (of the six) built in the U.K in 1938 that  came to N.Z. in 1939. HMH243 and HMH244 survive. I have rebuilt one of the 40 Bren carriers built by NZ railways in 1941. All 3 are MkI Brens. No MkIIs survive. There is in England a Scout carrier. that was in Australia (70 years) It is the sole surviving Scout. These are all "runners".

[Hoseman 14]

I have two British Mk1 Mortar Carriers that are on the back burner to do. 

[Ron 20]

Duke I have all three of Nigel's books but will need some time to go through them, but you would definitely find loads of advice and information and blokes with UC CAD drawing on here   http://www.mapleleafup.net/forums/index.php  Ron

Edited December 13, 2017 by Ron

[Morris C8 13]

It might be better to get the book vol 3 with the box of  the Drawings/blueprints of the Universal carriers .

  Keith

[Gina 0]

The national archive of Australia has all the drawings for the LP 2 carrier if that is of any use 

[bigduke6 10]

Thanks to all and must apologise for the late reply,  been a busy last few months with work etc, also had the pleasure of two weeks in BATUS......with very limited comms too.

The Volume 3 book looks to be very interesting.

 

 

[General Lee 10]

On 11/03/2018 at 6:00 AM, Gina said:

The national archive of Australia has all the drawings for the LP 2 carrier if that is of any use 

Are they available online Gina, or do you have to go to the archives?

Cheers. 

[Gina 0]

They are online on the national archives site ...I will look out the barcode if you are interested .

[General Lee 10]

10 hours ago, Gina said:

They are online on the national archives site ...I will look out the barcode if you are interested .

Cheers Gina, Much appreciated!

[Stuartarmytank 10]

Plans and specifications for Armoured Fighting Vehicles]
Contents date range	1941 - 1943
Series number	MP392/8 Click to see which government agency or person created this item.
Control symbol	5
Citation	NAA: MP392/8, 5
Item barcode	364517
Location	Melbourne
Access status	Open
Date of decision	23 May 1985
Physical format	PAPER FILES AND DOCUMENTS (allocated at series level)
Extent	4 cm
Date registered	12 Sep 1992

[Stuartarmytank 10]

use National Archives of Australia search the collection. The bar code is enough to get you there . There is a PDF download symbol click it and you have the plans .

[General Lee 10]

Thank you! 

[Bluebell 10]

The Australian carrier is entirely different from any of the riveted carriers and no use to you if you are building  a copy of a U.K. carrier.

[MatchFuzee 22]

Just found this CD, Universal Carrier Bren Gun Schematic drawings plans ORIGINAL DETAIL WW2 1940's it may be of interest someone.

https://www.ebay.ie/itm/Universal-Carrier-Bren-Gun-Schematic-drawings-plans-ORIGINAL-DETAIL-WW2-1940s-/283109129062?hash=item41ea9e7b66