Jump to content

Recommended Posts

Hi,

im new to the forum as I'm currently building a collection of 1/35 scale models of the vehicles I used during my time in the Artillery.

does anyone have a clansman 'pineapple' that would be able to send me the measurements of the pineapple so I can scratch build one please.

 

many thanks

stef

Share this post


Link to post
Share on other sites

Hi

 

I dug one out of storage this evening - it is approximately 5.5 inches wide and 6 inches high with the antenna base projecting about 2 inches above the body. The round bar at the bottom is inside the mast so does not add to the hight. The antenna element is in 3 sections of approximately 3 feet length each so a total of 9 feet - the bottom section is about an inch diameter - the top two are normal Clansman antenna rods. Photos attached below

 

Regards

 

Iain

 

attachment.php?attachmentid=127253&stc=1attachment.php?attachmentid=127254&stc=1attachment.php?attachmentid=127255&stc=1attachment.php?attachmentid=127256&stc=1attachment.php?attachmentid=127257&stc=1attachment.php?attachmentid=127258&stc=1

450.jpg

447.jpg

446.jpg

448.jpg

445.jpg

449.jpg

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



×