Jump to content
paulbrook

Morris 4 cylinder EH/EK Engine Parts (as fitted to the C8)

Recommended Posts

Internal parts wanted for engine rebuild of a 4 cylinder Morris EK/EH engine (as fitted to the C8).

 

I have tried the usual suppliers such as Cox and Turner and FW Thorntons and have had some success there but now need the following:

 

Valves and guides.

Valve Springs.

Timing chain.

Full gasket set ideally but just a head gasket would be fine.

 

Many thanks

 

Paul 07979 720466

Share this post


Link to post
Share on other sites
Internal parts wanted for engine rebuild of a 4 cylinder Morris EK/EH engine (as fitted to the C8).

 

I have tried the usual suppliers such as Cox and Turner and FW Thorntons and have had some success there but now need the following:

 

Valves and guides.

Valve Springs.

Timing chain.

Full gasket set ideally but just a head gasket would be fine.

 

Many thanks

 

Paul 07979 720466

 

Could get valve springs made up. Got them made for the Leyland

Share this post


Link to post
Share on other sites
Posted (edited)

I may have some stuff for Morris Commercial 4 cylinder engines. Bought a job lot engine bits.

 

Guy Labbe

attachment.php?attachmentid=125195&stc=1

engine bits.JPG

Edited by guy66

Share this post


Link to post
Share on other sites
I would try John Walker in Nottingham, 0115 960 7860

 

Many thanks Richard. Contact made and looking promising....

Share this post


Link to post
Share on other sites
Many thanks Richard. Contact made and looking promising....

 

there are some springs and pistons on evil bay at the moment but Morris commercial seems to bring up CD,s and other rubbish

Share this post


Link to post
Share on other sites
Guest
This topic is now closed to further replies.



×