Search the Community
Showing results for tags 'advice'.
Found 4 results
Hi Trying to sort out a modern regulator to replace the innards of a CAV 75BT-19X for my Bedford MW Has anyone used a Lucas RB108 mounted in the old regulator box and is this the correct way to wire it up ? Cheers Richard
I've searched everywhere online for details of how these go together but they don't seem to have made it into anyone's list of supported equipment. This is kind of a last ditch attempt to get advice from anyone who might know about them before I have a complete mental breakdown holding aluminium tubes and connectors! i put what I thought was an unsuccessful bid in on the Witham MOD Sales auction site, my bid didn't reach the reserve price so I forgot about it. Then the auctioneer dropped the reserve to my bid and I ended up having to pay for them. I am now the proud owner of 4 unissued closed command 8x8 foot canvas shelters with no frames, and a stillage containing 72 tent poles, two large water containers and an issued and "complete" tent and frame set that has so far defied my attempts to assemble into a useable shelter. I'm usually pretty good at puzzles but the bits of frame I've got will not go together in any recognisable way that I can decipher. I've pretty much come to the conclusion that I've only actually got part of the set that I would need. So, would anyone on here have a clue where I can get a instruction book or assembly instructions for a frame tent that seems to have three of everything and is sending me Bat-**** crazy? I'm going for a lie down in a darkened room! Eric
Hi all. I'm new to the MV world and have just bought a nice K9 radio Truck. It's on 9.00" x 20", 10 ply, cross country tyres at the moment - I believe they're called T pattern(?) see below. They're in pretty good condition - just a few cracks. I've been told that some people run on a more modern tyre that drives better and safer... Can I ask if anyone has experience or advice to offer on this? Is it a good idea and if so what are the best to use? Thanks for any advice - just trying to learn the ropes... Cheers Ben
I am rather new here, and considering a ferret project. Does any one here have any detailed pictures of the bolt pattern on the engine bell housing, or the transmission, as well as pictures of an empty engine bay (measurements would make you a god among men)? Also, does any one have information on the gear ratios for the vehicle? I am still hunting for a place to get them in the States, we'll see how that one goes. :cool2: