Ian Dunn

Hi rdx10 Never used it. How do I search ?

Does anyone know of a downloadable PDF copy of any manuals for the Bedford MK

Does anyone know of a downloadable PDF copy of any manuals for the Bedford MK

Does anyone know where we can get an Austin K9 fuel sender unit(or one to fit) and a Speedo cable(or one that fits)??? Thanks Ian

Hi Clive I have now taken all original ignition system off, I could not get anything out of it. I am going to put conventional dizzy etc onto it (the FFR is going back to my daughter at the end of the season and i think it would be easier for her that way. By the way which terminal on the coil goes to the Dizzy is it the positive ? Thanks Ian PS i cant make it to Cobberton as the Land Rover is my only transport as the wife has the car....

Sorry....24volt Ian

Please can anyone help I was driving to an event the other night, on the dual carriageway at 50mph all was well but as soon as i got caught in traffic and slowed down the engine lost power and died, i managed to get it going twice but on the third time ..no go, and then back home courtesy of the AA. by the way I am getting plenty of fuel through. Ian

Hi Andy Do you have a web address for Banisters?? Thanks Ian

Hi Richard Where do we get the pipe from? What size ? What sizes are the original fittings etc??? Also....How do you bend it? Ian

This post has answered one of my questions ...But i have another.... Can you use Copper pipes instead of the old steel ones on the braking/steering systems ? Thanks Ian

i noticed on the register that my friends Saracen 82BA85 is listed as having ANTI RPG MESH fitted doies anyone have any pic's or info on this Ian

could copper pipe be used ? ( or would the pressure be too much)

Has anyone had to replace the Red pipes (hydraulic) to the accumulators ? If so can you tell me what pipe and fittings i need. Thanks

Done my first bitr of work on a friends Saracen (Sally) this last 2 days when rubbing down paintwork on the rear to the right of the door there was a white number 88 what could this be and also the brown sound proofing is in shxx order where could we get some more? by the way reg is 82BA85

Hi Its not a bad show for this part of the country. We normally get about 10 to 15 Military vehicles there , from Jeepes to Jimmys and everything in between (including Land Rovers ) we also have an ENSA show Weapons disply and a full working field kitchen. so come and join us... Ian

Does anyone know where i can get an LPG firing 50 cal Browning from????? Ian

I already have the book It does not show enough of webbing etc Ian

has anyone got any photos of Gulf War 1... that show webbing and uniforms i am doing the old landy up for G W 1 (Op Granby) i know it is very mixed up but i would like more info What webbing was used(along side 58 pattern) can you help? Ian

Has anyone got a template for the 7th Armoured Brigade Sign as used on Landies in the 1st Gulf War? Ian

Does anyone have any info on Land Rover markings for the 16/5th Lancers in the Gulf (Operation Granby) Thanks Ian

Has anyone got a copy (or know where i can get one) of the Logo used by 7th Armoured in the Gulf ? or is it still the same as WW2 Ian

I would like some help with the following :- Were series 3 109 GS landies used in the First Gulf War ? if they were ....What was the colour sceme? also what were common markings for all units? Has anyone any photos? Thanks Ian

Hi All Has anyone any info / Photos of the Sankey mounted Field Kitchen in use or any info on how it would be set up in the field Thanks Ian

Hi All We ( Cornwall Area MVT) are having our annual event at Mount Edgcumbe House and Country Park, Cremyll,Torpoint,Cornwall. 29th,30th and 31st August. Last year we had almost 60 vehicles and this year we would like more. The Country Park was one of the main embarkation points for the U S 29th on D-Day and is set wonderfull countryside with views overlooking Plymouth sound,Drakes Island and Plymouth Hoe, There is entertainment laid on on Saturday night and a Bar-B-Q on both Saturday and Sunday and road runs during each day. For more info please contact me, Ian Dunn idunn@btinternet.com 01208 831989 Thanks Ian

Hi Howard I have just sent an e-mail to them. The trouble i am having at the moment is ... 1 It will only start when the air intake is taken off an then you put your hand over the carb 2 when it runs it does not run smoothly but hunts for a bit and then dies the plugs are clean and in good order have you any ideas? Ian