Jump to content

justinb

Members
 View Profile  See their activity

  • Posts

    129

  • Joined

  • Last visited

 Content Type 

Everything posted by justinb

  1. justinb
    The track is now sold
  2. justinb
    You don’t really need any rubber pads off road at all , as long as the bushes and pins are ok it’ll last ages off road .
  3. justinb
    I have a set of takeoff cvrt track for sale 156 links , rubber pads have worn to the point where they lightly mark tarmac when manoeuvring slowly, fine at normal speeds. collection only from Derbyshire £1200
  4. justinb
    Sent you a message
  5. justinb
    thanks for the info lads
  6. justinb
    evening folks, does anyone know the RAL number for the white paint used on the cvrt cummins? cheers justin
  7. justinb
    I had the k60 2 stroke diesel
  8. justinb
    I never had any problems starting mine ,hot or cold justin
  9. justinb
    evening all , I have a serious hydraulic oil leak on the steering rack (mk 2 ) is it possible to change the seals on the right hand ram (looking from the top) with everthing in situ or should I remove the whole thing? cheers justin
  10. justinb
    i'd quite like to build a propane rarden for the sabre ,would these boards do the job and how complicated is the rest of the engineering? justin
  11. justinb
    Yes chap , just off junction 25
  12. justinb
    The dipstick and tube are there and the flywheel , pretty sure the drain tap is there as well
  13. justinb
    Brilliant , glad it’s being saved , just about got mine sorted now , just need to find or make the swim steering levers in the cab and finish swapping the seals .
  14. justinb
    I have an old seized engine in the workshop , I’ll have a look tomorrow
  15. justinb
    looking good chap . brings back some memories of the mess mine was in.
  16. justinb
    Ok , thanks for looking regards justin
  17. justinb
    That would be brilliant , thanks . i know the stolly takes 14:00 x 20 tyres cheers justin
  18. justinb
    evening all . I'm after a spare wheel for a mk 2 stolly if anyone has one ,tyre or no tyre . cheers justin
  19. justinb
    evening folks . my cvrt has an annoying problem where in reverse and turning at the same time it tries to jump a tooth on the sprockets! all the shims and spacers are as the emers and the sprockets are in good condition /track tension correct . the only fault I know of Is a slightly lazy torsion bar . any ideas? regards, justin
  20. justinb
    that would be brilliant ,thanks justin
  21. justinb
    does anyone have the part no for the small pin which threads through the brake lining to attach to the spring on the bracket ? it effectively holds the brake lining off the drum when the handbrake isn't in use . cheers justin
  22. justinb
    its highly likely the injectors are generic so you may be able to get them rebuilt. j
  23. justinb
    xmod used to stock a lot of 432 stuff but ive not looked for ages ,someone was selling packs on milweb. have you tried the forum ? cheers justin
  24. justinb
    is it possible to change the seals without removing the big nuts ?or would it be easier to just change the pinion unit complete as I already have some of each hand . just discovered a leaking seal now I've put oil back in. cheers justin
  25. justinb
    Sent you a pm
×
×
  • Create New...