Jump to content

Clifford

Users Awaiting Email Confirmation
 View Profile  See their activity

  • Posts

    24

  • Joined

  • Last visited

 Content Type 

Everything posted by Clifford

  1. Clifford
    Yep, its that time again....Mike and i will be there, we are taking the GP this year but you can forget driving it there!......Cliff
  2. Clifford
    Before you take it out, check the gearbox lid and the stick. Be shaw that the pin on the bottom of the stick is not warn out and the slot that it fits in is OK.Its a known problem......Cliff
  3. Clifford
    murray, the oil filter has short line from bottom of the filter to the timing cover and a long line that starts at a union behind the fuel pump to the top of the filter...hope this helps ....best regards Cliff
  4. Clifford
    Rick , i sell the most comprehensive Earth kit that includes EVERY strap nut, bolt and clip and diagrams as to where they go. All for £135 plus P+P....HAPPY NEW YEAR... best regards Cliff...Universal Jeep Supplies
  5. Clifford
    i have some off those chains,[im only in milford] give me a call 01483 860403 any time after the 4th.....happy new year...best regards Cliff
  6. Clifford
    Mark, looks good to me!......good luck with it ....Cliff
  7. Clifford
    For all you Jimmi owners i have a small pile off N.O.S rear looms for jimmies @ £40 each... Cliff
  8. Clifford
    A very good friend of mine has paid nearly 16k for a nice willys MB...Cliff
  9. Clifford
    This was bodied by Willenhall coachcraft in Birmingham, one of 90.
  10. Clifford
    hello, this has jeep trailor rear brake back plates on the rear brakes!! clifford
  11. Clifford
    on the rebuild!! back too now!! thankyou clifford
  12. Clifford
    this is my woodie that i have recently finished.ew this woodie belonged to the earl of shrewsbury, he used it as a shooting brake, as i can see when i got it, it was in a very poor state. here is the full restoration start to finish: when i first got it. thankyou clifford harris
  13. Clifford
    jim , i broke up one of those for the engine, it was the same as yours and in a state of long term storage..all parts sealed up...loverly engine.........Cliff
  14. Clifford
    see if the leak is from the seam, is it is proberly because the needle used was slightly to big,the needle punches a hole that is bigger than the thead used...the problem dilemma is use 100% cotton thead that swells to fill the hole or use more modern theads that is more man made and does not swell so much....there is the BUT..cotton will rot 100 times faster than man made, and therefor the life of the canvas is in question...hope this explains...Cliff
  15. Clifford
    I had a 841 shalft drive, iwent to the old timer rally in northern Holland on it with my brother in law on his WLA, Ihad to keep waiting for him! ..Cliff :
  16. Clifford
    There is a farm in Headley , nr Bordon that has caravan storage, you could try him.........Cliff
  17. Clifford
    hI, I HAVE HAD ONE OF THESE FOR 2 YEARS, IT IS 6V, I GOT IT FROM MY LOCAL MOTOR BIKE SHOP, SINCE THEN I MY BROTHER HAS STOCKED THEM THAT DO 6 AND 12VOLT AT ABOUT £40. I WOULD SAY THAT IT EXTEND`S THE BATTERY LIFE BY80%... REGARDS CLIFF...
  18. Clifford
    thanks i am pleased with it.......cliff
  19. Clifford
    Yes, that`s the one do you want to sell or trade that one......Cliff
  20. Clifford
    demon, my MB is 10 dec 41 low windshield model slatt grill...cliff.
  21. Clifford
    Well, i got wet driving home from Beltring so i made this weather set, i know its not original but i am to old to get wet...........Cliff
  22. Clifford
    Demon, an original one would be nice, i have not seen a repro one, i am going to the Dallas dig out on sunday you never know what you can turn up........ Cliff
  23. Clifford
    does any body have a jeep speedo that goes up in 5mph at a time ie 5 -10-15-20 etc i can trade other parts or cash ....thanks Cliff
  24. Clifford
    does any body need seat cushions for a Hummer i have the drivers seat and one other in good condition........Cliff
×
×
  • Create New...