lowfat
-
Posts
448 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Gallery
Blogs
Events
Articles
Store
Downloads
Everything posted by lowfat
-
Believe me I’ve know this particular anson from about 1980when it arrived at cosford. It’s got metal wings I even took the lady over and showed her. I guess it doesn’t really matter
-
The mk19 avro ansons data plate in the raf museum at cosford is described as “wooden wings”only early ansons had wood wings. I pointed it out in 2000 to the lady responsible for the error. It still says wooden wings
-
I just loaded Adblock on my computer and iPhone. All fixed now. But it was truly bad
-
It’s sh!te.
-
Drove one of these
-
Stalwart HMLC Gallery
lowfat replied to ArtistsRifles's topic in Transporters & Wreckers (All Nations)
Ron is in Australia he has a thread ultimate forward control on Aus Land Rover forum. You have more chance of getting him there -
Just loosen and rotate the back shell on the plug. It’s a usual occurrence to have to rotate the back shell
-
At least its not just weighed in
-
Home office consultation on "Firearms Safety".
lowfat replied to MatchFuzee's topic in Weapons/Accessories
I call bullshit its illegal to own a firearm without a certificate already. Has it stopped the criminal element? Its just more control for control sake -
I use it on Helicopter electric systems it is authorised on Gas turbine engine electrical systems. It fixes lots of little electrical gremlins. Super stuff
-
Stabillant 22 is what you need for your slip ring lubricant. About 40 quid for a tiny bottle. Every time you open an electrical connector put a dab of this on all the pins. It’s a contact enhancer. Last for years.
-
http://www.helstongunsmiths.com/default.asp?ID1=426&ID2=0&ID3=0&ID4=0&CB=10%2F2%2F2020+6%3A43%3A09+PM
-
So long as the speeding tickets get answered and they get their fine Im pretty sure you could register it at Buckingham palace.
-
have you seen this https://www.the-saleroom.com/en-gb/auction-catalogues/gilbert-baitson/catalogue-id-ibgi10619/lot-d56ccc92-4588-4b6b-8760-ac0600cb37e2
-
That Cyprus johnny is always expensive..
-
Any links so that we can all be informed? otherwise its abit of a dead end....
-
15 minutes with a brush and some green irr paint would have it back to full value ...
-
No rush Dale
-
It’s the foundry that cast the block. Sheffield
-
Measurements would be great and I can knock one up
-
Liking it so far.. where did you get the B81 engine stand? I need one for one of my patients
-
I just had a delivery of ferrules 1/2 x 20 Tpi Female Brake Pipe Nuts (8104) For 8Mm Fuel/Brake Pipe . guess I will have a busy afternoon.
-
Thanks for the pointers. I will try and touch base with him. Meanwhile I made a prototype Pipe bender i used a 68 mm hole saw to copy the internal radius of the bend and scewd the blank to a piece of plywood. I used 10mm bolt for the pivot point of the handle. I got some skate board bearing races of amazon for the former. I got mixed results the test bend was perfect the full sized pipe ended up a little flat.
-
So small steps to get back on the stolly Mojo road. I have to make a set of the front caliper hard brake pipes. Ive got the 5/16 pipe . I would like to replace the female cones so I can have a bit of production run. Any body know the correct ones?
-
outstanding
