Danny P
Members-
Posts
297 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Blogs
Events
Articles
Store
Downloads
Everything posted by Danny P
-
restoration Bedford MW restoration project 2012/2013
Danny P replied to Danny P's topic in Blogs of MV restorations
I had a look again at the steering gear for the replacement of the grommet, lower, steering column cover (no. 66 encircled in previous drawing). In the below picture you can see the top of the steering gear with the woodruff key at the left and bearing assembly at the bottom. I have slacken the clamp at the base of the column cover (no.82 in previous drawing). I guess this is all I have to do to draw off the cover but there is no easy sliding movement I would expect. Have I overlooked something? Can anybody help me how to remove the cover please? Many thanks, Danny -
restoration Bedford MW restoration project 2012/2013
Danny P replied to Danny P's topic in Blogs of MV restorations
I therefore change the subject to the steering column. I wanted to replace the lower grommet on the steering column (red encircled in the drawing) but was surprised not knowing how to do it! I do not see how to remove the steering column cover, or tube, in order to be able to slide over the grommet. I have slacken the clamp on the tube and thought I could slide up the tube towards the steering (which is off) wheel but no. What do I have to loosen to slide on a new grommet? Cheers, Danny -
restoration Bedford MW restoration project 2012/2013
Danny P replied to Danny P's topic in Blogs of MV restorations
I have contacted Autosparks and they provide a great service by supplying a harness without the braided outer covering and invites the customer to run a dry fit of the harness. During fitment any changes that may be required can be documented and the harness can be returned to carry out any required amendments and apply the finished outer braiding. In order to make optimal use of their service, I have decided to wait and first complete the project as far as possible for a better understanding of the needs for a proper harness. Thanks, Danny -
restoration Bedford MW restoration project 2012/2013
Danny P replied to Danny P's topic in Blogs of MV restorations
Thank you guys! Very useful information! It is looking quite straightforward to me when following the diagram and colors. Danny -
restoration Bedford MW restoration project 2012/2013
Danny P replied to Danny P's topic in Blogs of MV restorations
Thanks Pete, this keeps me going as do the recent likes! ๐ I am considering buying a new wiring harness from autosparks but they are offering two versions. Does anybody know the difference between them? I haven't contacted autosparks yet because I might be able to ask someone who has installed a same wiring harness and knows the application, and hopefully not some issues, in practise! Furthermore, it is not quite clear to me what is meant by the extra option for wiring for the indicators i.e. what is meant by (quote) "Wiring for indicators - To work from original trafficator switch. Trafficators will NOT work off the same switch. (Order 'SFL' modification if you wish to use trafficators) It must be easy to explain but I am a Dutchman and so do not understand the language for 100% so to speak. ๐คจ Aren't trafficators the same as indicators? To some extent I realise I will need to order this extra option to legally use public roads (haha!) I hope someone can explain to me so I know what to order ... Many thanks, Danny -
restoration Bedford MW restoration project 2012/2013
Danny P replied to Danny P's topic in Blogs of MV restorations
The project is slowly progressing but with satisfying results! GS-body sprayed. Next, the complete front axle. Sandblasting and spraying of front axle parts (not too many pictures made but all done). Spraying of front axle parts. Front axle almost completed i.e. sandblasted, primed, in olive drab green and reassembled. New bushes. Ready to place back the complete front axle under the chassis. Next time is the replacing of the front axle and I am planning to do the steering column and pedals ... Cheers, Danny- 87 replies
-
- 10
-
The first digits of a WWII British identity disc
Danny P replied to Danny P's topic in Clothing/uniforms
I am now looking for the number block allocation for the 3rd division, 1st battalion south lancashire regiment which is not mentioned in the link in previous post. Can anybody help please? Thanks, Danny -
For sale, rare original early bedford mw aeroscreen brass brackets!
Danny P replied to Danny P's topic in Heads Up: For Sale!
Sorry, just Sold! -
restoration Bedford MW restoration project 2012/2013
Danny P replied to Danny P's topic in Blogs of MV restorations
Citroman, you will need professional punching tools to make these felt grommets properly. I wonder who makes the grommets for the Willy's jeep. Perhaps this manufacturer can also make them for other vehicles such as the bedford. I think I have all the original grommets for sizing! PPvdh, the bedford came from Koekelare Belgium. Cheers, Danny -
restoration Bedford MW restoration project 2012/2013
Danny P replied to Danny P's topic in Blogs of MV restorations
I would like to replace the felt grommets for the dash panel with new ones! Does anyone know where to get them? There are complete sets available for the willy's jeep but how about other vehicles? Cheers, Danny -
restoration Bedford MW restoration project 2012/2013
Danny P replied to Danny P's topic in Blogs of MV restorations
-
These felt grommets for the willys jeep are for sale at almost every military fair! I wonder if felt grommets are also available for the Bedford MW? I'm mainly looking for the ones used behind the dash panel but a complete set for the entire vehicle would be great ๐ฌ. Thanks, Danny
-
restoration Bedford MW restoration project 2012/2013
Danny P replied to Danny P's topic in Blogs of MV restorations
I think I've learned that you will get the best results if you are patient ...? ๐ โข Chassis and bulkhead in olive drab matt The chassis and buldhead were an easy job as there was no rot at all, no welding or whatever was needed. -
Hello, This kit bag came from a house clearance in the Netherlands! It has a blue greyish colour and has the soldiers name "Pretiatko" with his service number 224344. The name sounds Polish. There is also "Sweet G-Coy"written on it. Can anybody help me with its origin please? Please have a close look to the belt, closure and oval eyes rather then round eyes. Looks rare to me! Thanks, Danny
-
For sale early or pre-war British messtin S.& H. Ltd. 1939
Danny P replied to Danny P's topic in Heads Up: For Sale!
SOLD! -
Now I am really confused! I got some replies from well known WWII militaria dealers but they are contradictory. Reply 1: They usually have a line of cord going one way and 2 loosed type cords going the other way which this one does seem to have.The French military did copy them early post war but they tend to be of a much larger size. Saying that I know that dealers used to buy the French ones and cut them in half to make the standard British size so it really is not easy. Reply 2: They need to have 4 loosed type cords going one way as presented in attached pictures Reply 3: The brown color needs to be light brown. Post war or repro's are darker brown So this is not helping me very much indeed! I thought buying a British WWII camo scarf or face veil would be easy! Who is right and is knowing for sure? Thanks, Danny
-
Hello, I would like to buy an original British WWII camo scrim scarf but I really don't know the differences between British WWII versus post war/repro's. So I have added a picture and hope somebody can tell me if this particular one is original British WWII or post war/repro? Many thanks, Danny
-
Most probably not a vehicle related item but what kind of item could this be? It's has a cord, is C.W.T. marked and 1941 dated. No broad arrow! Thanks, Danny
-
The first digits of a WWII British identity disc
Danny P replied to Danny P's topic in Clothing/uniforms
Thank you very much, this will definately help ...! ๐ -
Everytime I like to buy a WWII British identity disc I don't know what to do because I really don't know to which unit the first digits of the serial number is assigned to. For instance, to which unit belongs serial number 7901260? Is there a list of digits and units which will help me when to buy one? Many thanks, Danny
-
Thank you .... 79 x 100 ....
-
Hello, Came along these Identity discs of J. Jeavons with service number 14815868 and CE (Church of England) religion. I do not know much about this topic but thought the double set or reserve set would be special. I know the first three digits represents a specific unit . Does anybody know which unit 148..... stands for? Can these ID discs be dated on the 8 digits number? Any other information is welcome! Many thanks, Danny The Netherlands