HWade
-
Posts
975 -
Joined
-
Last visited
Content Type
Profiles
Forums
Gallery
Blogs
Events
Articles
Store
Downloads
Everything posted by HWade
-
Wanted, a good used fuel tank for dodge D60, not the under cab, but out side chassis rail tank.
-
Wanted Complete NOS clutch pressure plate for GMC CCKW. Thanks.
-
Wanted Bedford MW dont mind a restoration project. please pm details.
-
Hi, i am in the process of restoring a GMC, The engine is the gmc 302, bell housing and flywheel same as a cckw. I wanted to use the gearbox from a cckw. The problem i have is there is no speedo drive from the gear box. The truck is only rear axle drive so no transfer box. Question did they ever do a speedo drive from this type of gear box, or is there a 5 speed box out there that would fit. Thanks.
-
Hello John Many thanks for that, ive not yet done anything yet, still working out the best way to go. Howard
-
Hello Phil. Thanks thats answered my question. Think I will have a swivel both ends. A bit of fabrication coming on. Thanks
-
Hello Phil, thanks for that, i do have stands i can alter to use as a test bed. But i am after a rotating stand so i can take the engine apart for inspection and rebuild. Also the best location to fix the stand to the block i would imagine remove the clutch housing and then bolt onto those.
-
Hello Chaps, I am wanting to fit a 1941 ford V8 engine into a stand, and I am looking for recommendations on engine stands, has anybody used one for a v8 and whats out there. Many Thanks Howard
-
Thanks, I've seen those.
-
Wanted 12 volt siren as fitted to jeeps and other MV,s.
-
GMC CCKW 353 Cargo. The truck is very very solid, steel body with wooden floor in great condition.Split Axles, Early grill, The cab is very solid no rot any where. truck still on 6 volt and on the button. Bar grip tyres all round loads of tread, some small signs of cracking. Inside of cab is mint and unmolested. The paintwork has a nice patina. The truck has stood for a number of years so will need going over. I did change the engine oil and drain the fuel tank and stick 40 ltrs of fresh fuel in it. PM me with interest. or mobile 07545107174
- 1 reply
-
- 1
-
-
Wanted for a Dodge WC51 /52 I require a used canvas set for my truck, i could go out and buy a new one but I am after a used one with a good Patina. Thanks Howard
-
Hello Peter, thanks for the reply and the information, the truck started its life as a decontamination unit, and i guess thats how the lever is there. The tipper was a post war mod done by a company in Norfolk, the pto on it now has a lever coming straight through the floor. This has certainly cleared up what the pull push lever was for. Ive attached a picture of the truck I have nearly finished restoring.
-
Hello Peter,With regards to the PTO activation lever, I am restoring a dodge d60, which is fitted with tipping gear, when I got the restoration it had already been taken to pieces. The truck has the same lever as yours but i cant for the life of me see cant see where it connects to on the pump on the gear box. There is another lever on the top of the pump that you turn, would the push pull lever under the dash just have been fitted as a matter of course, or should it be connected some where. Many Thanks Howard.
-
Hello Pete Some thing else i need for the c15 is a clutch fork if you have one please. Many Thanks Howard
-
Hello peter. Thats great yes, what is the price please. Here is my Address, The Mead, Debenham Road, Crowfield, Suffolk,IP6 9TE. Not sure if there are any couriers collecting. Thankks Howard
-
Wanted. Transfer box for a chevrolet CMP. must be complete. Please pm. or call me on 0754510174. Thanks. Howard.
-
I have a coventry climax 4 cylinder air cooled genset 6kva. The set is trailer mounted. I am trying to find a manual or a copy of one. if anyone can help that would be appreciated.
-
If anybody can help I am trying to track down this bus that i worked on back in June 2010. Thanks Howard.
-
Hello Tony Thanks for the heads up, but I wont have any customs to pay. Howard
-
Many Thanks just bought one.
-
Wanted. Electric roof vent fan for WC54. please PM me. Thanks Howard
-
HelloThanks for the offer, no I need it to produce a hood. Thanks.
-
Can someone help please I am trying to find a supplier of American Canvas, I am quite happy to import if I have to. Thank Howard
-
Hello I am after a window winder handle for a GMC Closed cab please. Thanks Howard
